THIS SYSTEM IS NOT PROGRAMMED. READ OUR DOCUMENTATION TO GET IDEAS ON HOW TO CONFIGURE THE SMART CONTROLLER WITH THE INCLUDED SOFTWARE. ITS UP TO YOU HOW YOU SET THE UNIT UP. THIS IS REALLY A KILLER DEAL ON AN AWESOME SYSTEM that injects fixed rate.
INCLUDES
Smart Controller
High Pressure 200-250 psi bypass pump
Relay
Relay Harness
Fuse
Fuse HOlder
15 Feet of Fluid hose
Checkvalve with Integrated Filter and Fittings
2 Injectors sized to your horse power range
Trunkmount tank or 1 gallon tank FREE (LIMITED TIME)
All mounting hardware for tank. Straps, brackets, screws bolts, etc
Roll of primary wire
Serial Cable (while supplies last only)
This device functions on many different levels. If you are looking for the most basic system or the most elaborate.
SMART CONTROLLER FEATURES
4 0-5V inputs (map, maf, tps, any 0-5 sensor)
2 high speed counter inputs (square wave frequency, RPM)
1 mv input
5 programmable outputs (can be used to activate or deactivate devices..up to 5 devices). Activation of any of these outputs can be conditional upto 3 of the inputs.
3 programmable LEDs. You can make the LEDS blink slow, fast, solid or turn off based on any of the inputs.
Programmable 0-5V output. You can program a 0-5V output based on your inputs.
Any of the inputs can be user defined. You can set the range of the RPM or voltage or Frequency within the software and have the controller react between those two variables.
Additional Information
Model:
cms1005
Manufacturer:
Coolingmist
