Import Image Racing will beat or meet any competitors pricing!

Powered by the newest technology...We call it smart injection for a reason. You can download a PDF to read a little about this. We have some nice examples and detailed software setup in this 25 page PDF http://www.coolingmist.net/instructions/smartinjection.pdf This device functions on many different levels. If you are looking for the most basic system or the most elaborate.

NEW!! Includes free gauge based datalog software! Hardware: # Failsafe included! Checks the status of the fluid in the line, If the system detects a fault (low fluid, not injecting when it should, clog, pump failure, solenoid failure, etc) the system will send out a signal. You can use this signal to activate or deactivate any device (such as boost controller or wastegate solenoid). # 4 0-5V inputs (map, maf, tps, any 0-5 sensor) # 2 high speed counter inputs (square wave frequency, RPM) # 1 mv input (can be used for EGT, etc) # 5 programmable outputs (can be used to activate or deactivate devices..up to 5 devices).

Activation of any of these outputs can be conditional upto 3 of the inputs. # 3 programmable LEDs. You can make the LEDS blink slow, fast, solid or turn off based on any of the inputs. # Programmable 0-5V output. You can program a 0-5V output based on your inputs. # If you want the air temperature sensor, choose from the dropdown box. Our flow sensor will be available shortly. # Any of the inputs can be user defined. You can set the MIN and MAX value. Please read the documentation in the PDF link provided earlier.