Import Image Racing will beat or meet any competitors pricing!

Need better diesel performance? Coolingmist has it. Compare this to the entry level competitors Diesel kits and be blown away at the value you get! This is a killer deal sure to give you killer performance. This is exactly the same as our Standard Trunk Mount kit, but it ships with 4 nozzles and a Tee. With these 4 nozzles, you will be able to size the correct nozzles for your diesel. These nozzles install with a 1/8th NPT and screw in from the outside of your pipe/manifold. This kits activates based on pressure. How simple is this? You set the PSI you want the system to inject and it turns on. All metal quick disconnect fittings, integrated checkvalve, pump, boost switch and 1.5 gallon tank make this the most exciting new kit for your Diesel. Just strap down the tank (straps included), Give power to the red wire, ground to the black wire, put the vacuum/boost line over the boost port, tap your intake and screw the nozzle in and your done!! Now Get back the power you are losing due to high EGTs and Inlet temps. Your Kit will be like the picture below, but have a tee and 4 nozzles to choose from. Make it a Coolingmist Stage I. We have tested this kit inside and out and are confident of the following: running a vacuum line to your trunk will still give you instant response. The unique tank/checkvalve setup insures that even with 10 or 15 or 20 feet feet of water line, the system will shut off and quit injecting within a second of power being cut. This means you will not have alot of water dripping in your intake after. The first time you inject after your tank has emptied will take you around 6 seconds to prime and pressurize the hose. As long as you dont run out of water, the response is instant.