Import Image Racing will beat or meet any competitors pricing!

One of the most important features of our trunk mount kits besides the super easy installation, is the fact that the system will always prime. We warrant this kit to out perform kits mounted in the engine bay. With less than 1 inch from the pump to the tank the response is INSTANT! Activated by a boost switch this system turns on an off based on boost.

You can set the boost switch between 1 and 25 psi. From us its set at 10. For example in its default configuration the system will turn on at 10 psi and not turn off until your manifold pressure drops below 10. Simple and effective. Our standard trunk mount kit is designed for those that want high performance and the easiest install possible. The Pump, Tank, Checkvalve, boost switch are all attached to the tank and installed for you.

The boost switch is our 1-25 psi switch, the pump is our high pressure black pump. This means you simply need power, ground, install the nozzle and route the hose. Its simple to install. Tank has 1.5 gallons. # We have tested this kit inside and out and are confident of the following: running a vacuum line to your trunk will still give you instant response.

The unique tank/checkvalve setup insures that even with 10 or 15 feet of water line, the system will shut off and quit injecting within a second of power being cut. This means you will not have alot of water dripping in your intake after. The first time you inject after your tank has emptied will take you around 6 seconds to prime and pressurize the hose. As long as you dont run out of water, the response is instant.

This product is simply amazing. Gone are the mess of wires and hard to install systems. This is top quality and you are getting an amazing price. We have limited numbers of these, so act now.