{"title":"Fuel Packages","description":"","products":[{"product_id":"1050-18-01-48-14-4-injector-dynamics-1050cc-fuel-injectors-w-top-feed-fuel-rails-subaru-sti-2004-2006-legacy-gt-2005-2006","title":"Injector Dynamics 1050cc Fuel Injectors w\/ Top Feed Fuel Rails Subaru STI 2004-2006 \/ Legacy GT 2005-2006","description":"\u003cp\u003e\u003cspan\u003eInjector Dynamics provide the absolute best fuel injectors available, and have quickly become the standard for tuners and car builders worldwide. Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them into sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.\u003cbr\u003e\u003cbr\u003eFits: Subaru STI 2004-2006 \/ Legacy GT 2005-2006\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003ePart #: 1050.18.01.48.14.4\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIn addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncluded with this kit is the clips and pins that fit the Injector Dynamics Injectors. You can either re-pin your factory harness or purchase the optional plug and play adapters.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis kit comes with billet fuel rails to convert your side feed equipped car to top feed. The fuel rails have -6an fittings on each end to leave your plumbing options open.\u003c\/span\u003e\u003c\/p\u003e \n\n","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":18350200553568,"sku":"idx1050.18.01.48.14.4","price":820.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Injector-Dynamics-1050cc-Fuel-Injectors-w-Top-Feed-Fuel-Rails-Subaru-STI-2004-2006-Legacy-GT-2005-2006.jpg?v=1743763096"},{"product_id":"deatschwerks-fuel-injectors-1200cc-w-top-feed-conversion-fuel-rails-2004-2006-sti-2005-2006-legacy-gt","title":"DeatschWerks Fuel Injectors 1200cc w\/Top Feed Conversion Fuel Rails 2004-2006 STI \/ 2005-2006 Legacy GT","description":"\u003cp\u003eSubaru Side Feed To Top Feed Fuel Rail Conversion Kit with 1200cc injectors for the following vehicles: \u003cbr\u003e*04-06 STI \u003cbr\u003e*05-06 Legacy GT \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-6 AN in and out\u003c\/li\u003e\n\u003cli\u003eFully Anodized in and out for e85 compatibility\u003c\/li\u003e\n\u003cli\u003e100% Drop in\u003c\/li\u003e\n\u003cli\u003e850cc, 1000cc, 1200cc and 1500cc Injectors available\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44897582547,"sku":"dwk6-101-1200","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Fuel-Injectors-1200cc-wTop-Feed-Conversion-Fuel-Rails-2004-2006-STI-2005-2006-Legacy-GT.jpg?v=1744301489"},{"product_id":"6-101-1000-deatschwerks-fuel-injectors-1000cc-w-top-feed-conversion-fuel-rails-2004-2006-sti-2005-2006-legacy-gt","title":"DeatschWerks Fuel Injectors 1000cc w\/Top Feed Conversion Fuel Rails 2004-2006 STI \/ 2005-2006 Legacy GT","description":"\u003cp\u003ePart #: 6-101-1000\u003cbr\u003e\u003cbr\u003eSubaru Side Feed To Top Feed Fuel Rail Conversion Kit with 1000cc injectors for the following vehicles: \u003cbr\u003e*04-06 STI \u003cbr\u003e*05-06 Legacy GT \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-6 AN in and out\u003c\/li\u003e\n\u003cli\u003eFully Anodized in and out for e85 compatibility\u003c\/li\u003e\n\u003cli\u003e100% Drop in\u003c\/li\u003e\n\u003cli\u003e850cc, 1000cc, 1200cc and 1500cc Injectors available\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44897598803,"sku":"dwk6-101-1000","price":619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Fuel-Injectors-1000cc-wTop-Feed-Conversion-Fuel-Rails-2004-2006-STI-2005-2006-Legacy-GT.jpg?v=1744301497"},{"product_id":"6-102-0750-deatschwerks-fuel-injectors-750cc-w-top-feed-fuel-rails-wrx-2002-2014-sti-2007-2021-legacy-gt-2007-2012-dw6-102-0750","title":"DeatschWerks Fuel Injectors 750cc w\/ Top Feed Fuel Rails WRX 2002-2014 \/ STI 2007-2021 \/ Legacy GT 2007-2012","description":"\u003cp\u003ePart #: 6-102-0750\u003cbr\u003e\u003cbr\u003eSubaru Top Feed Fuel Rail Upgrade Kit with 750cc injectors for the following vehicles: \u003cbr\u003e*2002-2014 WRX \u003cbr\u003e*2007-2017 STI \u003cbr\u003e*2007-2012 Legacy GT \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-6 AN in and out\u003c\/li\u003e\n\u003cli\u003eFully Anodized in and out for e85 compatibility\u003c\/li\u003e\n\u003cli\u003e100% Drop in\u003c\/li\u003e\n\u003cli\u003e850cc, 1000cc, 1200cc and 1500cc Injectors available\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44897619667,"sku":"dwk6-102-0750","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Fuel-Injectors-750cc-w-Top-Feed-Fuel-Rails-WRX-2002-2014-STI-2007-2021-Legacy-GT-2007-2012.jpg?v=1744020961"},{"product_id":"6-102-1200-deatschwerks-fuel-injectors-1200cc-w-top-feed-fuel-rails-wrx-2002-2014-sti-2007-2021-legacy-gt-2007-2012-dw6-102-1200","title":"DeatschWerks Fuel Injectors 1200cc w\/ Top Feed Fuel Rails WRX 2002-2014 \/ STI 2007-2021 \/ Legacy GT 2007-2012","description":"\u003cp\u003ePart #: 6-102-1200\u003cbr\u003e\u003cbr\u003eSubaru Top Feed Fuel Rail Upgrade Kit with 1200cc injectors for the following vehicles: \u003cbr\u003e*2002-2014 WRX \u003cbr\u003e*2007-2017 STI \u003cbr\u003e*2007-2012 Legacy GT \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-6 AN in and out\u003c\/li\u003e\n\u003cli\u003eFully Anodized in and out for e85 compatibility\u003c\/li\u003e\n\u003cli\u003e100% Drop in\u003c\/li\u003e\n\u003cli\u003e850cc, 1000cc, 1200cc and 1500cc Injectors available\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44897636307,"sku":"dwk6-102-1200","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Fuel-Injectors-1200cc-w-Top-Feed-Fuel-Rails-WRX-2002-2014-STI-2007-2021-Legacy-GT-2007-2012.jpg?v=1744301505"},{"product_id":"6-102-1000-deatschwerks-fuel-injectors-1000cc-w-top-feed-fuel-rails-wrx-2002-2014-sti-2007-2021-legacy-gt-2007-2012-dw6-102-1000","title":"DeatschWerks Fuel Injectors 1000cc w\/ Top Feed Fuel Rails WRX 2002-2014 \/ STI 2007-2021 \/ Legacy GT 2007-2012","description":"\u003cp\u003ePart #: 6-102-1000\u003cbr\u003e\u003cbr\u003eSubaru Top Feed Fuel Rail Upgrade Kit with 1000cc injectors for the following vehicles: \u003cbr\u003e*2002-2014 WRX \u003cbr\u003e*2007-2017 STI \u003cbr\u003e*2007-2012 Legacy GT \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-6 AN in and out\u003c\/li\u003e\n\u003cli\u003eFully Anodized in and out for e85 compatibility\u003c\/li\u003e\n\u003cli\u003e100% Drop in\u003c\/li\u003e\n\u003cli\u003e850cc, 1000cc, 1200cc and 1500cc Injectors available\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44897651411,"sku":"dwk6-102-1000","price":619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Fuel-Injectors-1000cc-w-Top-Feed-Fuel-Rails-WRX-2002-2014-STI-2007-2021-Legacy-GT-2007-2012.jpg?v=1743764751"},{"product_id":"6-101-1500-deatschwerks-side-feed-to-top-feed-fuel-rail-conv-kit-w-1500cc-injectors-sti-2004-2006-legacy-gt-2005-2006","title":"DeatschWerks Side Feed to Top Feed Fuel Rail Conv Kit w\/ 1500cc Injectors STI 2004-2006 \/ Legacy GT 2005-2006","description":"\u003cp\u003ePart #: 6-101-1500\u003cbr\u003e\u003cbr\u003eDeatschWerks offers two innovative rail-injector kits for the Subaru WRX, STI and other EJ20 and EJ25 Subaru engines - an Upgrade Kit and a Conversion Kit. Both kits include injectors ranging from 750cc to 2200cc and are engineered as a system where the injector, rails, and mounting hardware all work together to integrate flawlessly into the existing OE manifold and mounting points. Both systems are fully anodized for e85 compatibility, feature large bore -6AN fittings, and include everything needed for a drop in fitment. \u003cbr\u003e\u003cbr\u003e *Subaru Top Feed Conversion Fuel Rail Kits* \u003cbr\u003eThe DeatschWerks Conversion Kit is for applications that utilize side feed injectors, and in addition to supplying a consistent fuel supply, it allows the customer to run top feed injectors that are less expensive, tune better and are available in many more flow rate options.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44932991699,"sku":"dwk6-101-1500","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Side-Feed-to-Top-Feed-Fuel-Rail-Conv-Kit-w-1500cc-Injectors-STI-2004-2006-Legacy-GT-2005-2006.jpg?v=1744311497"},{"product_id":"6-101-2200-deatschwerks-side-feed-to-top-feed-fuel-rail-conv-kit-w-2200cc-injectors-subaru-sti-2004-2006-legacy-gt-2005-2006","title":"DeatschWerks Side Feed to Top Feed Fuel Rail Conv Kit w\/ 2200cc Injectors Subaru STI 2004-2006 \/ Legacy GT 2005-2006","description":"\u003cp\u003ePart #: 6-101-2200\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eFitment:\u003cbr\u003e\u003c\/p\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\"\u003e Subaru STI 2004-2006 \/ Legacy GT 2005-2006\u003cbr\u003e\u003cbr\u003eDeatschWerks offers two innovative rail-injector kits for the Subaru WRX, STI and other EJ20 and EJ25 Subaru engines - an Upgrade Kit and a Conversion Kit. Both kits include injectors ranging from 750cc to 2200cc and are engineered as a system where the injector, rails, and mounting hardware all work together to integrate flawlessly into the existing OE manifold and mounting points. Both systems are fully anodized for e85 compatibility, feature large bore -6AN fittings, and include everything needed for a drop in fitment. \u003cbr\u003e\u003cbr\u003e *Subaru Top Feed Conversion Fuel Rail Kits* \u003cbr\u003eThe DeatschWerks Conversion Kit is for applications that utilize side feed injectors, and in addition to supplying a consistent fuel supply, it allows the customer to run top feed injectors that are less expensive, tune better and are available in many more flow rate options. \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":44932997139,"sku":"dwk6-101-2200","price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/DeatschWerks-Side-Feed-to-Top-Feed-Fuel-Rail-Conv-Kit-w-2200cc-Injectors-Subaru-STI-2004-2006-Legacy-GT-2005-2006.jpg?v=1744311502"},{"product_id":"cobb-fuel-rails-line-kit-package-subaru-sti-2008-2021-sub000frlk","title":"Cobb Fuel Rails + Line Kit Package Subaru STI 2008-2021 | SUB000FRLK","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"accordion--simple__article\"\u003e20008-2021 Subaru STI\u003c\/p\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cspan\u003eThe COBB Fuel Rail + Line Kit allows for increased fuel capacity and consistent performance at each injector. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFuel Rail Line Kit Features\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eStainless Braided PTFE Line\u003c\/li\u003e\n\u003cli\u003eUp to 2500psi Operating Pressure\u003c\/li\u003e\n\u003cli\u003eDouble Swivel -6 AN Hose Ends\u003c\/li\u003e\n\u003cli\u003eSAE 30R9 Certified Hose\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play with COBB Fuel Rail Kit\u003c\/li\u003e\n\u003cli\u003eDifficult Installation Instructions\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"COBB Fuel Rail and Fuel Line Installation Instructions 08-21 sti\" href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/154992670\/SUB000FSYS+SUB000FSFF+-+COBB+Fuel+Rail+and+Fuel+Line+Installation+Instructions\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Rail\u003c\/strong\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCNC Machined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish with Laser Etched COBB Logo\u003c\/li\u003e\n\u003cli\u003e-8 AN to -6 AN Fittings Pre-Installed\u003c\/li\u003e\n\u003cli\u003eCompatible with Injector Dynamics Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eAllow Parallel Fuel Delivery\u003c\/li\u003e\n\u003cli\u003eDifficult Installation Effort\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/154992670\/SUB000FSYS+SUB000FSFF+-+COBB+Fuel+Rail+and+Fuel+Line+Installation+Instructions\" title=\"COBB Fuel Rail and Fuel Line Installation Instructions 08-21 sti\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":53072346963,"sku":"cobbSUB000FRLK","price":775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Cobb-Fuel-Rails-Line-Kit-Package-Subaru-STI-2008-2021-SUB000FRLK.jpg?v=1743766612"},{"product_id":"cobb-fuel-system-package-subaru-sti-2008-2021-sub000fsys","title":"Cobb Fuel System Package Subaru STI 2008-2021 | SUB000FSYS","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003e\u003c\/strong\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThe Subaru Fuel System Package Includes: Fuel Rails, Fuel Rail Line Kit, Fuel Pressure Regulator for Fuel Rail Kit, Top Feed 1050x Fuel Injectors, and the AEM High Flow Fuel Pump.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cstrong\u003e\u003cb\u003eSubaru Fuel System Package Includes:\u003c\/b\u003e\u003c\/strong\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eSubaru Fuel Rails \u003c\/li\u003e\n\u003cli\u003eSubaru Fuel Rail Line Kit \u003c\/li\u003e\n\u003cli\u003eSubaru Fuel Pressure Regulator for Fuel Rail Kit \u003c\/li\u003e\n\u003cli\u003eSubaru Top Feed 1050x Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eSubaru AEM High Flow Fuel Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cul class=\"no-b-margin\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cul class=\"no-b-margin\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong style=\"color: #f06666;\"\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan class=\"ql-cursor\"\u003eFuel Injector \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eWorks with Stock Fuel Rail\u003c\/li\u003e\n\u003cli\u003eNominal Flow Rate - 1065cc\/min @ 43.5psi\u003c\/li\u003e\n\u003cli\u003eMatched sets with dynamic flow rate variance within 1%\u003c\/li\u003e\n\u003cli\u003e14mm Bottom O-Ring\u003c\/li\u003e\n\u003cli\u003eData supplied for tuning injectors with Accesstuner Software\u003c\/li\u003e\n\u003cli\u003eIntermediate Installation Effort\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFuel Rail Line Kit Features\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eStainless Braided PTFE Line\u003c\/li\u003e\n\u003cli\u003eUp to 2500psi Operating Pressure\u003c\/li\u003e\n\u003cli\u003eDouble Swivel -6 AN Hose Ends\u003c\/li\u003e\n\u003cli\u003eSAE 30R9 Certified Hose\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play with COBB Fuel Rail Kit\u003c\/li\u003e\n\u003cli\u003eDifficult Installation Instructions\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"COBB Fuel Rail and Fuel Line Installation Instructions 08-21 sti\" href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/154992670\/SUB000FSYS+SUB000FSFF+-+COBB+Fuel+Rail+and+Fuel+Line+Installation+Instructions\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Rail\u003c\/strong\u003e \u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCNC Machined from 6061 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish with Laser Etched COBB Logo\u003c\/li\u003e\n\u003cli\u003e-8 AN to -6 AN Fittings Pre-Installed\u003c\/li\u003e\n\u003cli\u003eCompatible with Injector Dynamics Fuel Injectors\u003c\/li\u003e\n\u003cli\u003eAllow Parallel Fuel Delivery\u003c\/li\u003e\n\u003cli\u003eDifficult Installation Effort\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/154992670\/SUB000FSYS+SUB000FSFF+-+COBB+Fuel+Rail+and+Fuel+Line+Installation+Instructions\" title=\"COBB Fuel Rail and Fuel Line Installation Instructions 08-21 sti\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Pressure Regulator Features\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eOEM Subaru Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play with COBB Fuel Rails and Lines\u003c\/li\u003e\n\u003cli\u003eEthanol Compatible\u003c\/li\u003e\n\u003cli\u003eSheathing for Abrasion Resistance\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/51839096\/315200+-+COBB+Fuel+Pressure+Regulator+Kit\" title=\"315200 - COBB Fuel Pressure Regulator Kit STI\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eTuning Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Pump Features\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eTested 340lph @ 40psi\u003c\/li\u003e\n\u003cli\u003eCompact Size (65mm length x 39mm diameter)\u003c\/li\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003e\u003cspan\u003eThe COBB systems package allows for increased fuel capacity and consistent performance at each injector. \u003cstrong data-mce-fragment=\"1\"\u003eThis package requires tuning changes.\u003c\/strong\u003e COBB offers OTS Map support for some vehicles, check maps available for your car here: \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.cobbtuning.com\/maps\" data-mce-href=\"https:\/\/www.cobbtuning.com\/maps\"\u003eMAPS\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":53072561939,"sku":"cobbSUB000FSYS","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Cobb-Fuel-System-Package-Subaru-STI-2008-2021-SUB000FSYS.jpg?v=1743766617"},{"product_id":"otl-fronthalf-otl-front-half-fuel-line-kit-with-rails","title":"OTL Front Half Fuel Line Kit - with Rails","description":"Part #: OTL-FRONTHALF\u003cbr\u003e \u003cbr\u003e\u003cp\u003eThe complete OTL Fuel System includes everything you need to support fuel demands up to 1200whp on E85. Fuel lines are braided stainless with a PTFE core to handle any fuel type and the exterior is protected with a smooth PVC coating. All lines are pressure tested after assembly.\u003c\/p\u003e\n\u003cp\u003eOur fuel system is split into two parts and either kit can be used independently of the other.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFront Half Line\/Rail Kit\u003c\/strong\u003e includes rails, PTFE lines, regulator, gauge, fuel filter w\/check valve and adapter fittings to connect directly to the stock hardlines at the firewall. EFI adapters are also included for connecting to the stock hardlines at the firewall for feed and return. If combining with our back half surge tank kit, the front lines connect direct to our -8AN feed and -6AN return lines below the location of the stock hardlines.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBack Half Surge Tank System\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincludes sending unit hardware, aluminum surge tank, MagnaFuel inline fuel pump, PTFE lines, ABS mounting board and all required fittings. The mounting board sits in the spare tire well and is fastened down using your OEM spare tire retainer. All can be hidden under your factory trunk board and carpet for a clean install that can still haul the groceries. The back half system terminates at the firewall below the stock hardlines and can easily be connected to most upgraded front line\/rail kits.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease contact us with any fitment questions!!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis Front Half Fuel Line Kit includes:\u003c\/b\u003e\u003cbr\u003e- Outfront Billet Fuel Rails (STI or N\/A manifold)\u003cbr\u003e- Fuelab Pressure Regulator\u003cbr\u003e- Fuelab Pressure Gauge\u003cbr\u003e- Fuelab 40 Micron Stainless Filter w\/ Check Valve\u003cbr\u003e- 5x PTFE Hose Assy\u003cbr\u003e- 6x -6AN Port Adapter\u003cbr\u003e- 1x -6AN Plug\u003cbr\u003e- 2x -6AN to 5\/16 SAE EFI Adapter\u003cbr\u003e- 2x -6AN 90* Adapter\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"OTL","offers":[{"title":"Default Title","offer_id":19193788039264,"sku":"OTL-FRONTHALF","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/OTL-Front-Half-Fuel-Line-Kit-with-Rails.jpg?v=1744343271"},{"product_id":"prl-wifi-ethanol-content-analyzer-flex-fuel-kit-2018-2021-honda-accord-2-0t-prl-ha10-20t-ff-wif","title":"PRL WiFi Ethanol Content Analyzer \/ Flex Fuel Kit Honda Accord 2.0T 2018-2021 | PRL-HA10-20T-FF-WIFI","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e2018-2021 Honda Accord 2.0T\u003cbr\u003eFits all variant models including 10AT, 6MT, RHD, International Models, Etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi module wirelessly analyzes ethanol content via smart device\u003c\/li\u003e\n\u003cli\u003eOptional 0.5V - 4.5V configurable output for use with tuning device\/datalogger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe PRL Motorsports Plug ‘n Play WiFi Flex-Fuel \/ Ethanol Content Analyzer Kit allows customers to wirelessly monitor ethanol content via any smart device or enable flex fuel via an optional 0.5-4.5V configurable output with a tuning device. PRL's innovative Patent Pending design utilizes the factory fuel line, which eliminates the chance for alternative fuel line deterioration and improves aesthetics. This kit utilizes factory plugs\/outputs under the hood for power and communication to the ECU, meaning no need for additional wiring, cutting, splicing or running wires to the fuse box or through the firewall into the cabin! All hardware and bracketry is included for quick and easy installation. Kits can be installed and uninstalled within minutes. Please note that this kit does NOT utilize an ethanol content gauge, as we feel that this is unnecessary. Hondata and KTuner V1.2 both offer Bluetooth capabilities, while the KTuner V2 LCD screen can be used to display ethanol content if desired. All components are ethanol compliant!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDid you know that the factory fuel line assembly is actually Teflon and extremely resistant to ethanol-base fuels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory fuel line is actually constructed with an EPDM (fuel and oil resistant synthetic rubber) outer hose and inner ETFE (another Teflon coating that is similar to PTFE) liner, which offers great resistance to a variety of fuels, including ethanol-based fuels. Because of this, there is no reason to \"upgrade\" or replace the factory fuel line assembly when used with this Ethanol Content Analyzer \/ Flex Fuel Kit unless kinked or damaged (please note the \"Do Not Kink\" Warning located on the line).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Run Ethanol?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDue to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice. Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation. Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and\/or methanol, especially with high(er) compression factory turbocharged vehicles. E85 = 85% Ethanol and 15% Gasoline whereas E30 = 30% Ethanol and 70% Gasoline and so-on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Flex Fuel?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank. Flex-Fuel systems utilize an ethanol content analyzer to determine the amount of ethanol in a fuel system and a converter to send this reading to the vehicle’s ECU to instantaneously adjust for varying fuel mixtures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Flex-Fuel Converter Case w\/ Sealed \u0026amp; Potted Board (WiFi)\u003c\/li\u003e\n\u003cli\u003eGenuine GM Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003cli\u003eBillet Stock Location EFI Diverter Fittings\u003c\/li\u003e\n\u003cli\u003ePlug 'N Play Braided Wiring Harness\u003c\/li\u003e\n\u003cli\u003eStainless Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFLEX-FUEL KITS REQUIRE A DUAL-MAP \/ FLEX-FUEL TUNE\u003c\/li\u003e\n\u003cli\u003eFLEX-FUEL TABLES MUST BE ENABLED VIA DESIRED ENGINE MANAGEMENT SYSTEM\u003c\/li\u003e\n\u003cli\u003eCOMPATIBLE WITH BOTH HONDATA \u0026amp; KTUNER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":31772090925152,"sku":"PRL-HA10-20T-FF-WIFI","price":579.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/PRL-WiFi-Ethanol-Content-Analyzer-Flex-Fuel-Kit-Honda-Accord-2_0T-2018-2021-PRL-HA10-20T-FF-WIFI.webp?v=1744349502"},{"product_id":"smy-ptfe-kitrd-smy-top-feed-ptfe-fuel-line-kit-red-fuel-rails-fuel-pressure-regulator-subaru-wrx-2002-2014-sti-2004-2021","title":"SMY Top Feed PTFE Fuel Line Kit Red Fuel Rails \u0026 Fuel Pressure Regulator Subaru WRX 2002-2014 \/ STI 2004-2021","description":"Part #: SMY-PTFE-KITRD\u003cbr\u003e \u003cbr\u003e\n\u003cp\u003e\u003cspan\u003eThe SMY fuel line kit shown here is perfect for anyone looking to upgrade their OEM fueling setup. This kit will support up to 1000 hp. Our fuel lines are not the simple cheap rubber hoses with a nice jacket as supplied on many other kits. OurPTFE fuel lines are reinforced with braided stainless steel, then to make it pretty they are wrapped in a black nylon braided jacket. We also include all high-end AN fittings, even to the hard lines. This kit will remove the OEM fuel pressure regulators and replace them with an aftermarket fuel pressure regulator.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Full Fuel Line Upgrade Kit (PVC Coated)\u003cbr\u003e- Aluminum Fuel Rails\u003cbr\u003e- Custom SMY FPR Bracket (V2 upgraded)\u003cbr\u003e- Forged 90 degree Full FlowPTFE Fittings\u003cbr\u003e- All Black Anodized AN Fittings\u003cbr\u003e- Y-Fitting (For Equal Fuel Distribution)\u003cbr\u003e- E85 Compatible\u003cbr\u003e- Supports up to 1000 hp\u003cbr\u003e- Fixes the Fuel STUMBLE \/ Hiccup\u003cbr\u003e- Parallel Fuel Line Setup\u003cbr\u003e- Cooling Fins on Rails\u003cbr\u003e- Custom SMY FPR Bracket\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEach Kit Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 6 x Pre Assembled -6PTFE fuel lines with fittings (Teflon Core Hose \/ Steel Braided and PVC Coated)\u003cbr\u003e- 1 x FPR Bracket and screw (for Aeromotive part# 13136)\u003cbr\u003e- 1 x Y-Adapter (6an)\u003cbr\u003e- 2 x EFI Quick Disconnect 6AN to 5\/16 Fittings\u003cbr\u003e- 3 x Radius Port Adapter (6AN) Fittings\u003cbr\u003e- 4 x Straight Cut -8AN to -6AN Fittings\u003cbr\u003e- 1 x 6an Dual Hose Separator\u003cbr\u003e- 1 x Aeromotive Fuel Pressure Regulator (Adjustable Pressure from 30-70 PSI) 13136\u003cbr\u003e- 1 x TurboSmart Liquid Filled FPR Gauge 1\/8 NPT (0-100 PSI)\u003cbr\u003e- 1 Set of SMY Fuel Rails Gloss Red and Hardware (-8 Bore Size)\u003cbr\u003e- Zip Ties\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e- Professional Installation Recommended\u003cbr\u003e- AN Tools Recommended avoiding scoring of the AN fittings\u003cbr\u003e- Hand Tighten all fittings and mount all hoses prior to fully tighten all fittings\u003cbr\u003e- Custom Tuning Required\u003cbr\u003e- Fuel Pressure Regulator Is Installed on the Driver side of the Intake Manifold using Supplied Bracket\u003cbr\u003e- \u003cspan color=\"#FF0000\" style=\"color: #ff0000;\"\u003e\u003cb\u003eNew UPDATED Setup fits OEM TGVs and TGV Deletes\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2002-2007 WRX \u003cstrong\u003e(optional Upgrades needed see options)\u003c\/strong\u003e\u003cbr\u003e2004-2006 STI (w\/ Aftermarket Top Feed TGVs) \u003cstrong\u003e(optional Upgrades needed see options)\u003c\/strong\u003e\u003cbr\u003e2007 STI\u003cbr\u003e2008-2014 WRX\u003cbr\u003e2008-2014 STI\u003cbr\u003e2015-2021 STI\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SMY Performance","offers":[{"title":"Default Title","offer_id":32397491044448,"sku":"SMY-PTFE-KITRD","price":790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/SMY-Top-Feed-PTFE-Fuel-Line-Kit-Red-Fuel-Rails-Fuel-Pressure-Regulator-Subaru-WRX-2002-2014-STI-2004-2021_03fb2a30.jpg?v=1784718197"},{"product_id":"9-441-c102-0903-deatschwerks-dw440-fuel-pump-w-install-kit-single-dual-speed-controller-subaru-wrx-2002-2007-miata-1989-2005","title":"Deatschwerks DW440 Fuel Pump w\/ Install Kit + Single\/Dual Speed Controller Subaru WRX 2002-2007 \/ Miata 1989-2005","description":"\u003cp\u003e\u003cspan\u003ePart #: 9-441-C102-0903\u003cbr\u003e\u003cbr\u003e*Install Kit Included\u003cbr\u003e\u003cbr\u003e\u003cp\u003eFitment:\u003cbr\u003e\u003c\/p\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\"\u003e\u003c\/span\u003e\u003c\/p\u003e Subaru WRX 2002-2007 \/ Miata 1989-2005\u003cbr\u003e\u003cbr\u003eThe brushless DW440 delivers a lot of flow in a small package. With standard 13.8v battery voltage, the pump flows 440LPH at 40PSI to support 1000hp on gas and 750hp on e85. If even more flow is needed, the 40amp controller and brushless design make this pump an ideal candidate for use at voltages beyond typical 13.8 battery voltage. The pump and controller have been endurance tested at voltages up to 24v. At a recommended max intermittent voltage of 20v, the DW440 flows 620LPH at 40psi.\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eC102 Single Speed\/Dual Speed Controller. Single speed is the simple 100% duty cycle \"constant on\", Dual speed allows you to operate the DW440 at low duty cycle during normal driving conditions and full duty cycle during high load conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompact size - 4inches from Inlet to Outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBulkhead Wiring \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVenturi Outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncluded:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e440lph in-tank brushless fuel pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eSingle \u0026amp; Dual Speed Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e9-0903 Install Kit \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":32668011069536,"sku":"dwk9-441-C102-0903","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Deatschwerks-DW440-Fuel-Pump-w-Install-Kit-SingleDual-Speed-Controller-Subaru-WRX-2002-2007-Miata-1989-2005.jpg?v=1743696372"},{"product_id":"9-441-c102-0910-deatschwerks-dw440-fuel-pump-w-install-kit-single-dual-speed-controller-subaru-wrx-2008-2014-sti-2008-2021-dw9-441-c102-0910","title":"Deatschwerks DW440 Fuel Pump w\/ Install Kit + Single\/Dual Speed Controller Subaru WRX 2008-2014 \/ STI 2008-2021","description":"\u003cp\u003e\u003cspan\u003ePart #: 9-441-C102-0910\u003cbr\u003e\u003cbr\u003e*Install Kit included\u003cbr\u003e\u003cbr\u003e\u003cp\u003eFitment:\u003cbr\u003e\u003c\/p\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/nedry_gif_480x480.gif?v=1659023322\"\u003e\u003c\/span\u003e\u003c\/p\u003e  Subaru WRX 2008-2014 \/ STI 2008-2021\u003cbr\u003e\u003cbr\u003eThe brushless DW440 delivers a lot of flow in a small package. With standard 13.8v battery voltage, the pump flows 440LPH at 40PSI to support 1000hp on gas and 750hp on e85. If even more flow is needed, the 40amp controller and brushless design make this pump an ideal candidate for use at voltages beyond typical 13.8 battery voltage. The pump and controller have been endurance tested at voltages up to 24v. At a recommended max intermittent voltage of 20v, the DW440 flows 620LPH at 40psi.\n\u003cp\u003e\u003cspan mce-data-marked=\"1\"\u003eC102 Single Speed\/Dual Speed Controller. Single speed is the simple 100% duty cycle \"constant on\", Dual speed allows you to operate the DW440 at low duty cycle during normal driving conditions and full duty cycle during high load conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompact size - 4inches from Inlet to Outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBulkhead Wiring \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVenturi Outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncluded:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e440lph in-tank brushless fuel pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eSingle \u0026amp; Dual Speed Controller\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e9-0910 Install Kit \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":32668022308960,"sku":"dwk9-441-C102-0910","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Deatschwerks-DW440-Fuel-Pump-w-Install-Kit-SingleDual-Speed-Controller-Subaru-WRX-2008-2014-STI-2008-2021.jpg?v=1744354926"},{"product_id":"20-0354-03-radium-engineering-stainless-fuel-filter-kit-subaru-impreza-1993-2007-abs-models","title":"Radium Engineering Stainless Fuel Filter Kit Subaru Impreza 1993-2007 (ABS Models)","description":"Part #: 20-0354-03\u003cbr\u003e \u003cbr\u003e\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhen used in conjunction with \u003c\/span\u003e20-0353 Master Cylinder Brace(included)\u003cspan data-mce-fragment=\"1\"\u003e, this Radium Engineering kit was designed for the following left hand drive (LHD) vehicles: \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e93-07 Subaru Impreza (ABS models only)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e94-99 Subaru Legacy \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e97-08 Subaru Forester\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e05-06 Saab 9-2X\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot compatible with RHD vehicles\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003eIt is compatible with the older vehicles that used barbed fittings, newer vehicles that use SAE quick connect fittings, and aftermarket fuel rails that include a 6AN male inlet fitting. The OEM feed line is replaced with larger 3\/8\" fuel hose and -6AN Push Lok hose ends.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0354_inst.jpg\"\u003e\u003cbr\u003eNOTE: depending on the Subaru model\/year, the secondary air injection or washer fluid reservoir may need to be slightly relocated.\u003cbr\u003e\u003cbr\u003eThe complete \u003cmeta charset=\"utf-8\"\u003e20-0354-03 kit (shown below) includes 20-0353. Nothing else is required.\u003cbr\u003e\u003cimg height=\"400\" width=\"600\" alt=\"\" src=\"http:\/\/www.radiumauto.com\/Assets\/ProductImages\/20-0354.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":32913006067808,"sku":"rad20-0354-03","price":346.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Radium-Engineering-Stainless-Fuel-Filter-Kit-Subaru-Impreza-1993-2007-ABS-Models.jpg?v=1744356757"},{"product_id":"kit-fuelpump-1-aem-340lph-65mm-fuel-pump-kit-deatschwerks-install-kit-subaru-wrx-brz-scion-fr-s-ft-86","title":"AEM 340LPH 65mm WRX Fuel Pump Kit + DeatschWerks Install Kit Subaru \/ BRZ \/ Scion FR-S \/ FT-86","description":"\u003cp\u003ePart #: KIT-FUELPUMP-1\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment Information:\u003cbr\u003e\u003c\/strong\u003e-2015-2021 Subaru WRX\u003cbr\u003e-2013-2021 Subaru BRZ\u003cbr\u003e-2013-2016 Scion FR-S\u003cbr\u003e-2017-2019 Toyota 86\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e340 liters per hour flow (84gph) at 43psi fuel pressure\u003c\/li\u003e\n\u003cli\u003eIn-tank design\u003c\/li\u003e\n\u003cli\u003e39mm pump outlet diameter\u003c\/li\u003e\n\u003cli\u003ePlug n play ease of installation\u003c\/li\u003e\n\u003cli\u003eE85 compatible (pump gas no problem)\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003eOn this page, you are looking at the AEM 340LPH 65mm Fuel Pump Kit with the DeatschWerks Install kit. Why mix two brands? Well, they work great together and turn this into a plug n play solution for 15+ WRX\/BRZ\/FRS\/86. AEM’s high flow in-tank fuel pump is designed for high performance naturally aspirated and forced induction vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e9-1010 \/ 50-1220\u003cu\u003e\u003c\/u\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":39246088503392,"sku":"KIT-FUELPUMP-1","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/AEM-340LPH-65mm-WRX-Fuel-Pump-Kit-DeatschWerks-Install-Kit-Subaru-BRZ-Scion-FR-S-FT-86.jpg?v=1743696774"},{"product_id":"kit-ibr-fuelkit-1-i-build-race-cars-top-feed-fuel-rails-fuel-line-kit-subaru-wrx-02-14-sti-07-18-lgt-07-12-fxt-06-13","title":"I Build Race Cars Top Feed Fuel Rails + Fuel Line Kit Subaru WRX 02-14 \/ STI 07-21 \/ LGT 07-12 \/ FXT 06-13","description":"Part #: KIT-IBR-FUELKIT-1\u003cbr\u003e \u003cbr\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThis kit is designed for EJ20 and EJ25 top feed injector TGV housings. The end connections have a standard -8 ORB threaded connections and works great with our -6 AN Parallel Feed Fuel Line Kit. These rails are anodized with a Military Spec Type III Hard Coat. Its much thicker and harder than the normal anodizing process and leaves a great gray color that matches every build. The hardware is stainless steel to keep it looking great even for those of you that drive your cars like they should be driven!\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e\u003cspan\u003eThis kit is designed to replace the stock fuel lines on a Subaru with an EJ series engine when using aftermarket fuel rails. Included in the kit are anodized black aluminum fittings and a stainless steel reinforced fuel line with a nylon outer braid for abrasion resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"gmail-\"\u003e\u003cstrong\u003eIncluded in the kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x I Build Race Cars Top Feed Fuel Rails (pair)\u003c\/li\u003e\n\u003cli\u003e10ft of -6 AN fuel line that is both Gasoline and E85 Compatible\u003c\/li\u003e\n\u003cli\u003eQty 4 -8 ORB to -6 AN adapters to fit most aftermarket fuel rails\u003c\/li\u003e\n\u003cli\u003eQty 3 -6 ORB to -6 AN adapters to fit aftermarket fuel pressure regulators\u003c\/li\u003e\n\u003cli\u003eQty 2 5\/16 Quick Connect Fuel Line to -6 AN adapters to connect to OEM fuel hard lines\u003c\/li\u003e\n\u003cli\u003eQty 1 -6 AN Tee Fitting to allow for the fuel to feed each fuel rail in a parallel configuration\u003c\/li\u003e\n\u003cli\u003eQty 5 -6 AN Straight Fitting\u003c\/li\u003e\n\u003cli\u003eQty 7 -6 AN 90 Degree Fitting\u003c\/li\u003e\n\u003cli\u003eQty 1 -6 AN Aluminum Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatibility:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll Subaru EJ Series Motors with Top Feed Style Injectors and TGV Housings\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Import Image Racing","offers":[{"title":"Default Title","offer_id":39254522724448,"sku":"KIT-IBR-FUELKIT-1","price":339.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/I-Build-Race-Cars-Top-Feed-Fuel-Rails-Fuel-Line-Kit-Subaru-WRX-02-14-STI-07-21-LGT-07-12-FXT-06-13.jpg?v=1744357488"},{"product_id":"ibr-flex-fuel-sensor-kit-2008-2021-wrx-sti","title":"IBR Flex Fuel Sensor Kit Subaru WRX \/ STI \/ Forester XT \/ Legacy GT \/ Outback XT | IBR-FLX01-GRFA","description":"\u003cp class=\"\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: Nexa_Free_Bold !important; font-weight: bold; overflow-wrap: break-word;\"\u003e3 Pin Version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2002-2005 WRX\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2004-2006 STi\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2004-2008 Forester XT\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2005-2006 Legacy GT\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2005-2006 Outback XT\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: Nexa_Free_Bold !important; font-weight: bold; overflow-wrap: break-word;\"\u003e5 Pin Version\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2007-2021 STi\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2008-2021 WRX\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2007-2012 Legacy GT\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2007-2009 Outback XT\u003cbr style=\"font-family: Nexa_Free_Bold !important; overflow-wrap: break-word;\"\u003e2009-20013 Forester XT\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/em\u003e This kit works with all fuel management systems but the car must be tuned specifically to run flex fuel. \u003cstrong\u003e(DOES NOT WORK WITH COBB GREENSPEED UPDATE)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003eThis kit is designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. Our system also properly references the ECU 5V power to provide the most consistent and accurate data. We have supplied hose assemblies for both the 2008+ STi and WRX in a single kit to reduce complication and confusion when ordering. The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.\u003cbr\u003e\u003cbr\u003eSince the cars only have two TGV plugs capable of receiving inputs you cannot run our Secondary Injection Controller, Flex Fuel Sensor and Fuel Pressure Sensor kits all at the same time. You can only run a maximum of two of these three items. The SIC can be wired as power only in order to utilize all three but a custom harness must be made.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaceable wiring harness that will be sold separately\u003c\/li\u003e\n\u003cli\u003eAutomotive grade wiring\u003c\/li\u003e\n\u003cli\u003eNo need for 12v supply from rear O2 sensor (common failure point)\u003c\/li\u003e\n\u003cli\u003eInstallation can be done from the top with no need to crawl under the car\u003c\/li\u003e\n\u003cli\u003eProperly referenced analog output from ECU 5V for better accuracy\u003c\/li\u003e\n\u003cli\u003ePotted housing with solid pin connector for the ultimate in durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\u003c\/ul\u003e\n\u003cp class=\"\" id=\"yui_3_17_2_1_1633617651588_481\"\u003e\u003cstrong\u003eIncluded in the kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContinental Flex Fuel Sensor\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Bracket\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Controller\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eFuel Lines that fit both the 08-21 STi and 08-21 WRX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"I Build Race Cars","offers":[{"title":"Default Title","offer_id":39378217992288,"sku":"IBR-FLX01-GRFA","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/IBR-Flex-Fuel-Sensor-Kit-Subaru-WRX-STI-Forester-XT-Legacy-GT-Outback-XT-IBR-FLX01-GRFA.jpg?v=1780397966"},{"product_id":"walbro-450lph-in-tank-fuel-pump-e85-version-with-filter-kit","title":"Walbro 450lph In-Tank Fuel Pump E85 Version with Filter Kit","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Walbro 450 E85 compatible fuel pump (F90000267) is the staple fuel pump for the performance market. Most likely if someone's selling a high-volume fuel pump, it's a rebadged Walbro. This pump is capable of flowing 400 liters per hour (lph), providing gobs of fuel ready at will to feed your thirsty cars. Do it once and do it right-- Get a Walbro! Also commonly called the \"walbro 450 or 465 lph pump\" its the same pump.\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis one comes with the filter kit. If you do not need the filter kit you can buy just the pump here, \u003c\/p\u003e\n\u003ch1 class=\"Polaris-Header-Title_2qj8j\"\u003e\u003ca href=\"https:\/\/www.importimageracing.com\/products\/walf90000267-walbro-450lph-in-tank-fuel-pump-e85-version-f90000267?variant=39246488731744\" title=\"f90000267\"\u003eF90000267\u003c\/a\u003e\u003c\/h1\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eUniversal - This part is non application specific. Please verify compatibility before purchase. May require some modification for proper installation.\u003c\/span\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":39428286414944,"sku":"KIT-FUELPUMP-2","price":155.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/Walbro-450lph-In-Tank-Fuel-Pump-E85-Version-with-Filter-Kit.jpg?v=1782991776"},{"product_id":"prl-wifi-ethanol-content-analyzer-flex-fuel-kit-2017-2021-honda-civic-type-r-fk8-prl-hcr-ff-wifi","title":"PRL WiFi Ethanol Content Analyzer \/ Flex Fuel Kit Honda Civic Type-R FK8 2017-2021 | PRL-HCR-FF-WIFI","description":"\u003cdiv style=\"text-align: left;\" align=\"center\" data-mce-style=\"text-align: left;\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2017-2021 Honda Civic Type-R FK8\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cp\u003eFits all variant models including RHD, International Models, Etc.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0568\/5703\/4945\/files\/CTR_Flex_Fuel_Installation_Guide_fad5c5f5-db65-4e4f-90dd-09b0354652e5.pdf?v=1625168391\"\u003eFLEX FUEL INSTALL GUIDE\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=e9SLFfMVSUM\u0026amp;t=41s\" title=\"PRL Motorsports Flex Fuel Ethanol Content Analyzer With WiFi Module Overview\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=e9SLFfMVSUM\u0026amp;t=41s\"\u003eWiFi How-To Use\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cstrong\u003eNow with WiFi Module!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003eImportant Notes: \u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eNOW WITH WIFI MODULE TO WIRELESSLY ANALYZE ETHANOL CONTENT VIA SMART DEVICE\u003c\/li\u003e\n\u003cli\u003eOPTIONAL 0.5V - 4.5V CONFIGURABLE OUTPUT FOR USE WITH TUNING DEVICE\/DATALOGGER\u003c\/li\u003e\n\u003cli\u003eCOMPATIBLE WITH HONDATA ONLY\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"CRE Honda Catch Can Mounting Brackets\" href=\"https:\/\/crecustom.square.site\/shop\/honda\/2\" data-mce-href=\"https:\/\/crecustom.square.site\/shop\/honda\/2\"\u003eCATCH CAN MOUNTING BRACKETS AVAILABLE FROM CRE CUSTOM\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUpgraded Replacement Fuel Hoses:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"2017-2021 Honda Civic Type-R FK8 PTFE Flex Fuel Line Assembly\" href=\"https:\/\/prlmotorsports.com\/products\/2016-2021-honda-civic-1-5t-ptfe-fuel-line-kit?_pos=6\u0026amp;_sid=0b31dd074\u0026amp;_ss=r\" data-mce-href=\"https:\/\/prlmotorsports.com\/products\/2016-2021-honda-civic-1-5t-ptfe-fuel-line-kit?_pos=6\u0026amp;_sid=0b31dd074\u0026amp;_ss=r\"\u003ePTFE Flex Fuel Line Assembly\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"2017-2021 Honda Civic Type-R FK8 Billet EFI Flex Fuel Union Fitting\" href=\"https:\/\/prlmotorsports.com\/products\/2016-2021-honda-civic-1-5t-billet-efi-flex-fuel-union-fitting?_pos=9\u0026amp;_sid=0b31dd074\u0026amp;_ss=r\" data-mce-href=\"https:\/\/prlmotorsports.com\/products\/2016-2021-honda-civic-1-5t-billet-efi-flex-fuel-union-fitting?_pos=9\u0026amp;_sid=0b31dd074\u0026amp;_ss=r\"\u003eBillet EFI Flex Fuel Union Fitting\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eTechnical Notes:\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Flex Fuel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank. Flex-Fuel systems utilize an ethanol content analyzer to determine the amount of ethanol in a fuel system and a converter to send this reading to the vehicle’s ECU to instantaneously adjust for varying fuel mixtures.\u003c\/p\u003e\n\u003cp\u003eOur Plug ‘n Play Flex-Fuel Kit utilizes factory plugs\/outputs under the hood for power and communication to the ECU, meaning no need for additional wiring, cutting, splicing or running wires through the firewall into the cabin! This kit supplies everything needed for a quick and easy installation. Please note that our kit does NOT utilize an ethanol content gauge, as we feel that this is unnecessary. Hondata and KTuner V1.2 both offer Bluetooth capabilities, while the KTuner V2 LCD screen can be used to display ethanol content if desired. All components are ethanol compliant!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Run Ethanol?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice. Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation. Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and\/or methanol, especially with high(er) compression factory turbocharged vehicles.\u003c\/p\u003e\n\u003cp\u003eE85 = 85% Ethanol and 15% Gasoline whereas E30 = 30% Ethanol and 70% Gasoline and so-on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Flex-Fuel Converter Case w\/ Sealed \u0026amp; Potted Board (WiFi)\u003c\/li\u003e\n\u003cli\u003eGenuine GM Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003cli\u003ePlug 'N Play Braided Wiring Harness\u003c\/li\u003e\n\u003cli\u003eStainless Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eGates Barricade High-Pressure Fuel Injection Hose\u003c\/li\u003e\n\u003cli\u003eEFI Quick Connect Fitting\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFLEX-FUEL KITS REQUIRE A DUAL-MAP \/ FLEX-FUEL TUNE\u003c\/li\u003e\n\u003cli\u003eFLEX-FUEL TABLES MUST BE ENABLED VIA DESIRED ENGINE MANAGEMENT SYSTEM\u003c\/li\u003e\n\u003cli\u003eCOMPATIBLE WITH BOTH HONDATA \u0026amp; KTUNER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":39550388666464,"sku":"PRL-HCR-FF-WIFI","price":579.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/PRL-WiFi-Ethanol-Content-Analyzer-Flex-Fuel-Kit-Honda-Civic-Type-R-FK8-2017-2021-PRL-HCR-FF-WIFI.webp?v=1743770333"},{"product_id":"prl-wifi-ethanol-content-analyzer-flex-fuel-kit-2016-2021-honda-civic-1-5t-prl-hc10-ff-wifi","title":"PRL WiFi Ethanol Content Analyzer \/ Flex Fuel Kit Honda Civic 1.5T 2016-2021 | PRL-HC10-FF-WIFI","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e2016-2021 Honda Civic 1.5T\u003c\/p\u003e\n\u003cp\u003eFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi module wirelessly analyzes ethanol content via smart device\u003c\/li\u003e\n\u003cli\u003eOptional 0.5V - 4.5V configurable output for use with tuning device\/datalogger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe PRL Motorsports Plug ‘n Play WiFi Flex-Fuel \/ Ethanol Content Analyzer Kit allows customers to wirelessly monitor ethanol content via any smart device or enable flex fuel via an optional 0.5-4.5V configurable output with a tuning device. PRL's innovative Patent Pending design utilizes the factory fuel line, which eliminates the chance for alternative fuel line deterioration and improves aesthetics. This kit utilizes factory plugs\/outputs under the hood for power and communication to the ECU, meaning no need for additional wiring, cutting, splicing or running wires to the fuse box or through the firewall into the cabin! All hardware and bracketry is include for quick and easy installation. Kits can be installed and uninstalled within minutes. Please note that this kit does NOT utilize an ethanol content gauge, as we feel that this is unnecessary. Hondata and KTuner V1.2 both offer Bluetooth capabilities, while the KTuner V2 LCD screen can be used to display ethanol content if desired. All components are ethanol compliant!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDid you know that the factory fuel line assembly is actually Teflon and extremely resistant to ethanol-base fuels?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory fuel line is actually constructed with an EPDM (fuel and oil resistant synthetic rubber) outer hose and inner ETFE (another Teflon coating that is similar to PTFE) liner, which offers great resistance to a variety of fuels, including ethanol-based fuels. Because of this, there is no reason to \"upgrade\" or replace the factory fuel line assembly when used with this Ethanol Content Analyzer \/ Flex Fuel Kit unless kinked or damaged (please note the \"Do Not Kink\" Warning located on the line).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Run Ethanol?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDue to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice. Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation. Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and\/or methanol, especially with high(er) compression factory turbocharged vehicles.\u003cbr\u003e\u003cbr\u003eE85 = 85% Ethanol and 15% Gasoline whereas E30 = 30% Ethanol and 70% Gasoline and so-on.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat is Flex Fuel?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank. Flex-Fuel systems utilize an ethanol content analyzer to determine the amount of ethanol in a fuel system and a converter to send this reading to the vehicle’s ECU to instantaneously adjust for varying fuel mixtures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Flex-Fuel Converter Case w\/ Sealed \u0026amp; Potted Board (WiFi)\u003c\/li\u003e\n\u003cli\u003eGenuine GM Continental Ethanol Content Sensor\u003c\/li\u003e\n\u003cli\u003eBillet Stock Location EFI Diverter Fittings\u003c\/li\u003e\n\u003cli\u003ePlug 'N Play Braided Wiring Harness\u003c\/li\u003e\n\u003cli\u003eStainless Mounting Bracket\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Read Before Ordering:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFLEX-FUEL KITS REQUIRE A DUAL-MAP \/ FLEX-FUEL TUNE\u003c\/li\u003e\n\u003cli\u003eFLEX-FUEL TABLES MUST BE ENABLED VIA DESIRED ENGINE MANAGEMENT SYSTEM\u003c\/li\u003e\n\u003cli\u003eCOMPATIBLE WITH BOTH HONDATA \u0026amp; KTUNER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"PRL Motorsports","offers":[{"title":"Default Title","offer_id":39558982402144,"sku":"PRL-HC10-FF-WIFI","price":579.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/PRL-WiFi-Ethanol-Content-Analyzer-Flex-Fuel-Kit-Honda-Civic-1_5T-2016-2021-PRL-HC10-FF-WIFI.webp?v=1743770444"},{"product_id":"iag-ptfe-fuel-system-kit-with-fpr-black-fuel-rails-subaru-sti-08-21-wrx-08-14-iag-afd-2350bk","title":"IAG PTFE Fuel System Kit with FPR \u0026 Black Fuel Rails Subaru STI 08-21 \/ WRX 08-14 | IAG-AFD-2350BK","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2014 Subaru \u003c\/span\u003eWRX \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe IAG PTFE Engine Bay Fuel System Kit for the 08-21 Subaru STI and 08-14 WRX combines IAG popular PTFE Fuel Line kit with IAG Top Feed Fuel Rails and the Aeromotive Regulator for a complete installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit provides everything you need to successfully feed your engine with enough fuel to meet your horsepower demands. Aeromotive regulators are an excellent choice to ensure consistent and reliable fuel pressure and delivery. Each line kit is compatible with modern ethanol fuels, including E85.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE is a coating that resists heat and corrosion, making it ideal for all automotive fluid types.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE hoses will not allow the permeation of fuel vapors and will eliminate the chances of fuel smell that other lines can exhibit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePre-assembled to application-specific lengths for an easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Fuel Line Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) IAG Fuel Rails - Black\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Aeromotive Adjustable Fuel Pressure Regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOEM or IAG TGV Housings are required for installation.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInjectors are required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"IAG","offers":[{"title":"Default Title","offer_id":39626924687456,"sku":"IAG-AFD-2350BK","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/IAG-PTFE-Fuel-System-Kit-with-FPR-Black-Fuel-Rails-Subaru-STI-08-21-WRX-08-14-IAG-AFD-2350BK.jpg?v=1743698912"},{"product_id":"iag-ptfe-fuel-system-kit-with-fpr-golden-fuel-rails-subaru-sti-08-21-wrx-08-14-iag-afd-2350gd","title":"IAG PTFE Fuel System Kit with FPR \u0026 Golden Fuel Rails Subaru STI 08-21 \/ WRX 08-14 | IAG-AFD-2350GD","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2014 Subaru \u003c\/span\u003eWRX \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe IAG PTFE Engine Bay Fuel System Kit for the 08-21 Subaru STI and 08-14 WRX combines IAG popular PTFE Fuel Line kit with IAG Top Feed Fuel Rails and the Aeromotive Regulator for a complete installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit provides everything you need to successfully feed your engine with enough fuel to meet your horsepower demands. Aeromotive regulators are an excellent choice to ensure consistent and reliable fuel pressure and delivery. Each line kit is compatible with modern ethanol fuels, including E85.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE is a coating that resists heat and corrosion, making it ideal for all automotive fluid types.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE hoses will not allow the permeation of fuel vapors and will eliminate the chances of fuel smell that other lines can exhibit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePre-assembled to application-specific lengths for an easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Fuel Line Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) IAG Fuel Rails - Golden\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Aeromotive Adjustable Fuel Pressure Regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOEM or IAG TGV Housings are required for installation.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInjectors are required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"IAG","offers":[{"title":"Default Title","offer_id":39626947723360,"sku":"IAG-AFD-2350GD","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/IAG-PTFE-Fuel-System-Kit-with-FPR-Golden-Fuel-Rails-Subaru-STI-08-21-WRX-08-14-IAG-AFD-2350GD.jpg?v=1743771260"},{"product_id":"iag-ptfe-fuel-system-kit-with-fpr-red-fuel-rails-subaru-sti-08-21-wrx-08-14-iag-afd-2350rd","title":"IAG PTFE Fuel System Kit with FPR \u0026 Red Fuel Rails Subaru STI 08-21 \/ WRX 08-14 | IAG-AFD-2350RD","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2008-2014 Subaru \u003c\/span\u003eWRX \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe IAG PTFE Engine Bay Fuel System Kit for the 08-21 Subaru STI and 08-14 WRX combines IAG popular PTFE Fuel Line kit with IAG Top Feed Fuel Rails and the Aeromotive Regulator for a complete installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit provides everything you need to successfully feed your engine with enough fuel to meet your horsepower demands. Aeromotive regulators are an excellent choice to ensure consistent and reliable fuel pressure and delivery. Each line kit is compatible with modern ethanol fuels, including E85.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE is a coating that resists heat and corrosion, making it ideal for all automotive fluid types.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePTFE hoses will not allow the permeation of fuel vapors and will eliminate the chances of fuel smell that other lines can exhibit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePre-assembled to application-specific lengths for an easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Fuel Line Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) IAG Fuel Rails - Red\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Aeromotive Adjustable Fuel Pressure Regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOEM or IAG TGV Housings are required for installation.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInjectors are required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n","brand":"IAG","offers":[{"title":"Default Title","offer_id":39626957095008,"sku":"IAG-AFD-2350RD","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/IAG-PTFE-Fuel-System-Kit-with-FPR-Red-Fuel-Rails-Subaru-STI-08-21-WRX-08-14-IAG-AFD-2350RD.jpg?v=1744366127"},{"product_id":"i-build-race-cars-flx01-flex-fuel-upgrade-kit-with-3-pin-harness-ibr-flxupg-3pin","title":"I Build Race Cars FLX01 Upgrade Kit with 3 Pin Harness Subaru WRX 02-05 \/ STI 04-06 | IBR-FLXUPG-3PIN","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2002-2005 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e2004-2006 Subaru STi\u003c\/p\u003e\n\u003cp\u003e2004-2008 Subaru Forester XT\u003c\/p\u003e\n\u003cp\u003e2005-2006 Subaru Legacy GT\u003c\/p\u003e\n\u003cp\u003e2005-2006 Subaru Outback XT\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe I Build Race Cars FLX01 Flex Fuel Upgrade Kit has been designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. This system also properly references the ECU 5V power to provide the most consistent and accurate data. iBR supplies hose assemblies for both the 08-21 STi and WRX in a single kit to reduce complication and confusion when ordering. The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSince the cars only have two TGV plugs capable of receiving inputs you cannot run our Secondary Injection Controller, Flex Fuel Sensor and Fuel Pressure Sensor kits all at the same time. You can only run a maximum of two of these three items. The SIC can be wired as power only in order to utilize all three but a custom harness must be made.\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis upgrade is great for those who have an existing flex fuel system that is unreliable or has failed, as well as for those that are looking to do a custom fuel system and want the flexibility to source some of their own components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaceable wiring harness with automotive grade wiring\u003c\/li\u003e\n\u003cli\u003eNo need for 12v supply from rear O2 sensor (common failure point)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation can be done from the top with no need to crawl under the car\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProperly referenced analog output from ECU 5V for better accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePotted housing with solid pin connector for the ultimate in durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTuning to specifically run flex fuel is \u003cspan data-mce-fragment=\"1\"\u003erequired \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Flex Fuel Sensor Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) 3 Pin TGV Plug\/Wiring Harness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware for Mounting Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade kit will not work with the latest tuning software changes. It works with all fuel management systems and the car must already be tuned specifically to run flex fuel. This kit has the same voltage output of other popular kits; retuning your car most likely will not be required if you are just replacing another brand of flex fuel controller.\u003c\/p\u003e\n\u003cp\u003eDo not mount controller directly on intake manifold. Read installation instructions thoroughly prior to install.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n","brand":"I Build Race Cars","offers":[{"title":"Default Title","offer_id":39627749949536,"sku":"IBR-FLXUPG-3PIN","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/I-Build-Race-Cars-FLX01-Upgrade-Kit-with-3-Pin-Harness-Subaru-WRX-02-05-STI-04-06-IBR-FLXUPG-3PIN.jpg?v=1744112728"},{"product_id":"i-build-race-cars-flx01-upgrade-kit-with-5-pin-harness-subaru-wrx-08-14-sti-07-21-ibr-flxupg-5pin","title":"I Build Race Cars FLX01 Upgrade Kit with 5 Pin Harness Subaru WRX 08-14 \/ STI 07-21 | IBR-FLXUPG-5PIN","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2007-2021 Subaru STi\u003c\/p\u003e\n\u003cp\u003e2008-2014 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e2007-2012 Subaru Legacy GT\u003c\/p\u003e\n\u003cp\u003e2007-2009 Subaru Outback XT\u003c\/p\u003e\n\u003cp\u003e2009-2013 Subaru Forester XT\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe I Build Race Cars FLX01 Flex Fuel Upgrade Kit has been designed to provide a way to data log and monitor the ethanol content of fuel on most new Subaru Vehicles. Our proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. This system also properly references the ECU 5V power to provide the most consistent and accurate data. iBR supplies hose assemblies for both the 08-21 STi and WRX in a single kit to reduce complication and confusion when ordering. The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSince the cars only have two TGV plugs capable of receiving inputs you cannot run our Secondary Injection Controller, Flex Fuel Sensor and Fuel Pressure Sensor kits all at the same time. You can only run a maximum of two of these three items. The SIC can be wired as power only in order to utilize all three but a custom harness must be made.\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis upgrade is great for those who have an existing flex fuel system that is unreliable or has failed, as well as for those that are looking to do a custom fuel system and want the flexibility to source some of their own components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaceable wiring harness with automotive grade wiring\u003c\/li\u003e\n\u003cli\u003eNo need for 12v supply from rear O2 sensor (common failure point)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation can be done from the top with no need to crawl under the car\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProperly referenced analog output from ECU 5V for better accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePotted housing with solid pin connector for the ultimate in durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTuning to specifically run flex fuel is \u003cspan data-mce-fragment=\"1\"\u003erequired \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlex Fuel Sensor Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5 Pin TGV Plug\/Wiring Harness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware for Mounting Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade kit will not work with the latest tuning software changes. It works with all fuel management systems and the car must already be tuned specifically to run flex fuel. This kit has the same voltage output of other popular kits; retuning your car most likely will not be required if you are just replacing another brand of flex fuel controller.\u003c\/p\u003e\n\u003cp\u003eDo not mount controller directly on intake manifold. Read installation instructions thoroughly prior to install.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n","brand":"I Build Race Cars","offers":[{"title":"Default Title","offer_id":39627759321184,"sku":"IBR-FLXUPG-5PIN","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/products\/I-Build-Race-Cars-FLX01-Upgrade-Kit-with-5-Pin-Harness-Subaru-WRX-08-14-STI-07-21-IBR-FLXUPG-5PIN.jpg?v=1744202411"},{"product_id":"cobb-fuel-pressure-sensor-kit-5-pin-subaru-sti-2015-2021-315650","title":"Cobb Fuel Pressure Sensor Kit (5 Pin) Subaru STI 2008-2021 | 315650","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"section--region\"\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe Cobb Fuel Pressure Sensor Kit is a plug and play solution enabling users to easily monitor Fuel Pressure on a Custom Accessport monitor by utilizing existing factory inputs. The Fuel Pressure Sensor Kit uses OEM quality connectors, making fit and finish second to none.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eMonitoring Fuel Pressure is vital on any vehicle, especially those that are asking more of their fuel system. As demand on a fuel system increases, so do the consequences of a failure. Monitoring fuel pressure will alert users if there is a fault in the vehicles' fuel system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM quality connectors\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum sensor adapter\u003c\/li\u003e\n\u003cli\u003e0-100 psi sensor\u003c\/li\u003e\n\u003cli\u003e5-Pin fuel pressure sensor harness\u003c\/li\u003e\n\u003cli\u003e-6 AN 1\/8\" NPT adapter\u003c\/li\u003e\n\u003cli\u003eCustom tuning required\u003c\/li\u003e\n\u003cli\u003eRequired for COBB NexGen Flex Fuel OTS Maps\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/2871820414\/Subaru+Fuel+Pressure+Sensor+Kit+with+NexGen+Flex+Fuel+and+Fuel+Lines\" title=\"COBB 2015-2021 SUBARU STI FUEL PRESSURE SENSOR KIT (5 PIN)\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"section--region\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":39642789314656,"sku":"cobb315650","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Fuel-Pressure-Sensor-Kit-5-Pin-Subaru-STI-2008-2021-315650.jpg?v=1754566453"},{"product_id":"cobb-nexgen-flex-fuel-ethanol-sensor-kit-subaru-sti-2008-2021-325650","title":"Cobb NexGen Flex Fuel Ethanol Sensor Kit Subaru STI 2008-2021 | 325650","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"section--region\"\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe COBB NexGen Flex Fuel Ethanol Sensor Kit measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in a Flex Fuel calibration.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThis plug and play NexGen Ethanol Sensor Kit is the heart of COBB's NexGen Flex Fuel product offering. It consists of an ethanol content sensor with mounting bracket, fuel lines to be used with the COBB Fuel Lines, a NexGen Flex Fuel module, and a plug-and-play wiring harness to bring it all together.\u003cbr\u003e\u003cbr\u003eThe OE quality ethanol content sensor is secured to a bespoke powder coated aluminum bracket. Fuel is then fed to and from the sensor with pre-made fuel line with OE quick disconnect. A billet adapter is included to allow for seamless integration with the COBB Fuel Rail Line Kit.\u003cbr\u003e\u003cbr\u003eThe NexGen Flex Fuel Module is mounted to the passenger side strut tower and handles all of the data processing before sending ethanol content to the ECU to be used by an Accessport-delivered NexGen Flex Fuel calibration.\u003cbr\u003e\u003cbr\u003eTying everything together is a custom, easy to install, plug-and-play wiring harness. Utilizing OE quality wiring and connectors makes adding NexGen Flex Fuel on your supported Subaru both quick and reliable.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNexGen Flex Fuel Module\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug and Play Wiring Harness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEthanol Content Sensor with Bracket\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cobbtuning.atlassian.net\/wiki\/spaces\/PRS\/pages\/2867724319\/VA+STI+NexGen+Flex+Fuel+Installation+Instructions\" title=\"2015-2021 Subaru STI Cobb NexGen Flex Fuel Ethanol Sensor Kit (325650) Installation Instructions\" target=\"_blank\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"section--region\"\u003e\u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e \u003c\/em\u003eThis product does NOT work with factory fuel rails and lines. \u003cspan data-mce-fragment=\"1\"\u003eThe \u003c\/span\u003e\u003ca title=\"Cobb Fuel Rails Subaru STI 2008-2021 | 343150\" href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-subaru-sti-2008-2021-343150\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-subaru-sti-2008-2021-343150\"\u003eCOBB Fuel Rails\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e and \u003c\/span\u003e\u003ca title=\"Cobb Fuel Rail Line Kit Subaru STI 2008-2021 | 343250\" href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rail-line-kit-subaru-sti-2008-2021-343250\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rail-line-kit-subaru-sti-2008-2021-343250\"\u003eCOBB Fuel Lines\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e are available to purchase separately- individually as needed or as a kit \u003c\/span\u003e\u003ca title=\"Cobb Fuel Rails + Line Kit Package Subaru STI 2008-2021 | SUB000FRLK\" href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-line-kit-package-subaru-sti-2008-2021-sub000frlk\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-line-kit-package-subaru-sti-2008-2021-sub000frlk\"\u003eCobb Fuel Rails + Line Kit Package\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":39642790297696,"sku":"cobb325650","price":790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-NexGen-Flex-Fuel-Ethanol-Sensor-Kit-Subaru-STI-2008-2021-325650.jpg?v=1743699050"},{"product_id":"cobb-previous-ethanol-kit-to-nexgen-flex-fuel-sensor-kit-upgrade-subaru-sti-2015-2021-325650","title":"Cobb Previous Ethanol Kit to NexGen Flex Fuel Sensor Kit Upgrade Subaru STI 2015-2021 | 315670","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"section--region\"\u003e2015-2021 Subaru STI\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018 Subaru STI \u003c\/span\u003eType RA\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe COBB NexGen Flex Fuel Module and Harness ONLY kit is intended to be used for those who have the Cobb previous implementation of Flex Fuel installed and do not need a new ethanol content sensor in order to convert to a NexGen Stage 2+Flex Fuel Power Package configuration.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe NexGen Flex Fuel Module is mounted to the passenger side strut tower and handles all of the data processing before sending ethanol content to the ECU to be used by an Accessport-delivered NexGen Flex Fuel calibration.\u003cbr\u003e\u003cbr\u003eTying your existing Cobb Ethanol Content Sensor to the Cobb NexGen Flex Fuel Module is a custom, easy to install, plug-and-play wiring harness. Utilizing OE quality wiring and connectors makes adding NexGen Flex Fuel on your supported Subaru both quick and reliable.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cem\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e \u003c\/em\u003eThis kit includes the Module and Harness only.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e \u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThis product does NOT work with the factory fuel rails and fuel lines.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe \u003ca href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-subaru-sti-2008-2021-343150\" title=\"Cobb Fuel Rails Subaru STI 2008-2021 | 343150\" target=\"_blank\"\u003eCOBB Fuel Rails\u003c\/a\u003e and \u003ca href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rail-line-kit-subaru-sti-2008-2021-343250\" title=\"Cobb Fuel Rail Line Kit Subaru STI 2008-2021 | 343250\" target=\"_blank\"\u003eCOBB Fuel Lines\u003c\/a\u003e are available to purchase separately- individually as needed or as a kit \u003ca href=\"https:\/\/www.importimageracing.com\/products\/cobb-fuel-rails-line-kit-package-subaru-sti-2008-2021-sub000frlk\" title=\"Cobb Fuel Rails + Line Kit Package Subaru STI 2008-2021 | SUB000FRLK\" target=\"_blank\"\u003eCobb Fuel Rails + Line Kit Package\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":39642793246816,"sku":"cobb315670","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Previous-Ethanol-Kit-to-NexGen-Flex-Fuel-Sensor-Kit-Upgrade-Subaru-STI-2015-2021-315670.jpg?v=1744202492"},{"product_id":"cobb-nexgen-stage-2-to-nexgen-stage-2-flex-fuel-package-upgrade-subaru-sti-08-21-nexgenff001","title":"Cobb NexGen Stage 2 to NexGen Stage 2 Flex Fuel Package Upgrade Subaru STI 08-21 | NEXGENFF001","description":"\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"section--region\"\u003e2008-2021 Subaru STI (with the Cobb \u003cspan data-mce-fragment=\"1\"\u003eNexGen Stage 2 Power Package)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNexGen Ethanol Content Sensor Kit\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Sensor Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"section--region\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThis combination of COBB's NexGen Ethanol Content Sensor and Fuel Pressure Sensor Kits allows users to take full advantage of their NexGen Stage 2 Power Package by adding the ability to take advantage of higher ethanol content fuels found at E85 fueling stations. These components are required for use with the supporting COBB NexGen Stage 2+FlexFuel OTS Maps.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe COBB NexGen Flex Fuel Ethanol Sensor Kit measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in a Flex Fuel calibration. This plug and play NexGen Ethanol Sensor Kit is the heart of COBB's NexGen Flex Fuel product offering. It consists of an ethanol content sensor with mounting bracket, fuel lines to be used with the COBB Fuel Lines, a NexGen Flex Fuel module, and a plug-and-play wiring harness to bring it all together.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003eThe COBB Fuel Pressure Sensor Kit uses OEM quality connectors, making fit and finish second to none. Utilizing existing factory inputs, this kit will allow users to easily monitor Fuel Pressure on a custom accessport monitor.\u003c\/p\u003e\n\u003cp class=\"section--region\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e (\u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ehttp:\/\/www.p65warnings.ca.gov\u003c\/a\u003e)\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":39647412748384,"sku":"cobbNEXGENFF001","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-NexGen-Stage-2-to-NexGen-Stage-2-Flex-Fuel-Package-Upgrade-Subaru-STI-08-21-NEXGENFF001.jpg?v=1743771489"},{"product_id":"i-build-race-cars-flx02-flex-fuel-upgrade-kit-green-speed-subaru-sti-2015-2021-ibr-flx02-upg","title":"I Build Race Cars FLX02 Flex Fuel Upgrade Kit Green Speed Subaru STI 2008-2021 | IBR-FLX02-UPG","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003elease \u003c\/em\u003enote:\u003c\/strong\u003e \u003c\/em\u003eThis kit is specifically designed to work the latest Cobb “Green Speed” tuning packages. Please work with your tuner to understand what options they have to tune your car as compatibility may vary from tuner to tuner. If you are looking to replace older flex fuel kits without the need to retune, take a look at iBR's \u003ca href=\"https:\/\/www.importimageracing.com\/products\/ibr-flex-fuel-sensor-kit-2008-2021-wrx-sti\" title=\"IBR Flex Fuel Sensor Kit 2008-2021 Subaru WRX \/ STI\"\u003eFLX01 Kit\u003c\/a\u003e or \u003ca title=\"I Build Race Cars FLX01 Upgrade Kit with 5 Pin Harness Subaru WRX 08-14 \/ STI 07-21 | IBR-FLXUPG-5PIN\" href=\"https:\/\/www.importimageracing.com\/products\/i-build-race-cars-flx01-upgrade-kit-with-5-pin-harness-subaru-wrx-08-14-sti-07-21-ibr-flxupg-5pin\"\u003eFLX01 Upgrade Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe I Build Race Cars FLX02 Flex Fuel Upgrade Kit has been designed to provide a way to data log and monitor the ethanol content and be compatible with Cobb’s latest version of their tuning software. iBR's proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. This system also properly references the ECU 5V power to provide the most consistent and accurate data. The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaceable wiring harness that will be sold separately\u003c\/li\u003e\n\u003cli\u003eAutomotive grade wiring\u003c\/li\u003e\n\u003cli\u003eNo need for 12v supply from boost control solenoid circuit\u003c\/li\u003e\n\u003cli\u003eInstallation can be done from the top with no need to crawl under the car\u003c\/li\u003e\n\u003cli\u003eProperly referenced analog output from ECU 5V for better accuracy\u003c\/li\u003e\n\u003cli\u003ePotted housing with solid pin connector for the ultimate in durability\u003c\/li\u003e\n\u003cli\u003eTuning is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFLX02 Flex Fuel Sensor Controller\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis kit is compatible with \u003c\/span\u003e\u003ca href=\"https:\/\/www.importimageracing.com\/products\/ibr-fuel-pressure-sensor-kit\" title=\"IBR Fuel Pressure Sensor Kit Subaru WRX 08-21 \/ STI 07-21 \/ Legacy GT 07-12\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.importimageracing.com\/products\/ibr-fuel-pressure-sensor-kit\"\u003eiBR's standard FPS01 Fuel Pressure Sensor kit\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e which is available to purchase separately and is a great addition when you are pushing your fuel system to its limit with the higher flow rates of E85 mixtures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e (\u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ehttp:\/\/www.p65warnings.ca.gov\u003c\/a\u003e)\u003cbr\u003e\n\u003c\/div\u003e","brand":"I Build Race Cars","offers":[{"title":"Default Title","offer_id":39688534949984,"sku":"IBR-FLX02-UPG","price":489.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/I-Build-Race-Cars-FLX02-Flex-Fuel-Upgrade-Kit-Green-Speed-Subaru-STI-2008-2021-IBR-FLX02-UPG.jpg?v=1744367510"},{"product_id":"i-build-race-cars-flx02-flex-fuel-full-kit-green-speed-subaru-sti-2008-2021-ibr-flx02","title":"I Build Race Cars FLX02 Flex Fuel Full Kit Green Speed Subaru STI 2008-2021 | IBR-FLX02","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008-2021 Subaru STI\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003elease \u003c\/em\u003enote:\u003c\/strong\u003e \u003c\/em\u003eThis kit is specifically designed to work the latest Cobb “Green Speed” tuning packages. Please work with your tuner to understand what options they have to tune your car as compatibility may vary from tuner to tuner. If you are looking to replace older flex fuel kits without the need to retune, take a look at iBR's \u003ca href=\"https:\/\/www.importimageracing.com\/products\/ibr-flex-fuel-sensor-kit-2008-2021-wrx-sti\" title=\"IBR Flex Fuel Sensor Kit 2008-2021 Subaru WRX \/ STI\"\u003eFLX01 Kit\u003c\/a\u003e or \u003ca title=\"I Build Race Cars FLX01 Upgrade Kit with 5 Pin Harness Subaru WRX 08-14 \/ STI 07-21 | IBR-FLXUPG-5PIN\" href=\"https:\/\/www.importimageracing.com\/products\/i-build-race-cars-flx01-upgrade-kit-with-5-pin-harness-subaru-wrx-08-14-sti-07-21-ibr-flxupg-5pin\"\u003eFLX01 Upgrade Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe I Build Race Cars FLX02 Flex Fuel Upgrade Kit has been designed to provide a way to data log and monitor the ethanol content and be compatible with Cobb’s latest version of their tuning software. iBR's proprietary controller reduces complications by generating its own on board 12V supply to power the sensor. This reduces wiring, installation time and improves reliability. This system also properly references the ECU 5V power to provide the most consistent and accurate data. The kit also comes with a custom wiring harness that can be detached from the controller to make any troubleshooting and repairs simple and painless.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaceable wiring harness that will be sold separately\u003c\/li\u003e\n\u003cli\u003eAutomotive grade wiring\u003c\/li\u003e\n\u003cli\u003eNo need for 12v supply from boost control solenoid circuit\u003c\/li\u003e\n\u003cli\u003eInstallation can be done from the top with no need to crawl under the car\u003c\/li\u003e\n\u003cli\u003eProperly referenced analog output from ECU 5V for better accuracy\u003c\/li\u003e\n\u003cli\u003ePotted housing with solid pin connector for the ultimate in durability\u003c\/li\u003e\n\u003cli\u003eTuning is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFLX02 Flex Fuel Sensor Controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinental Flex Fuel Sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlex Fuel Sensor Bracket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFuel Lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit is compatible with \u003ca title=\"IBR Fuel Pressure Sensor Kit Subaru WRX 08-21 \/ STI 07-21 \/ Legacy GT 07-12\" href=\"https:\/\/www.importimageracing.com\/products\/ibr-fuel-pressure-sensor-kit\"\u003eiBR's standard FPS01 Fuel Pressure Sensor kit\u003c\/a\u003e which is available to purchase separately and is a great addition when you are pushing your fuel system to its limit with the higher flow rates of E85 mixtures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e (\u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ehttp:\/\/www.p65warnings.ca.gov\u003c\/a\u003e)\u003cbr\u003e\n\u003c\/div\u003e","brand":"I Build Race Cars","offers":[{"title":"Default Title","offer_id":39688611594336,"sku":"IBR-FLX02","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/I-Build-Race-Cars-FLX02-Flex-Fuel-Full-Kit-Green-Speed-Subaru-STI-2008-2021-IBR-FLX02.jpg?v=1744367513"},{"product_id":"iag-ptfe-flex-fuel-system-kit-w-aeromotive-fpr-iag-fuel-rails-for-08-14-wrx-08-21-sti-black","title":"IAG Black PTFE Flex Fuel System Kit w\/ Aeromotive FPR, IAG Fuel Rails WRX 08-14 \/ STI 08-21 | IAG-AFD-2352BK","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008-2014 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e2008-2021 Subaru STI\u003cspan style=\"box-sizing: border-box; outline: 0px !important; font-family: Arimo; font-size: 16px; font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"359\" data-end=\"681\"\u003eThe IAG Fuel System Kit is engineered to simplify high-performance fuel delivery for Subaru builds. Whether you're aiming for a reliable street setup or a 1000+ horsepower track monster, this all-in-one kit delivers everything needed for efficient, ethanol-safe fuel distribution with no guesswork or cutting required.\u003c\/p\u003e\n\u003cp data-start=\"683\" data-end=\"1017\"\u003eConstructed in the USA using chemical-resistant PTFE (Polytetrafluoroethylene) line material, the kit ensures long-term durability and ethanol compatibility. With included IAG billet fuel rails and an Aeromotive adjustable fuel pressure regulator, this kit offers the precision and flow capacity required for serious horsepower goals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-start=\"1029\" data-end=\"1046\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1048\" data-end=\"1925\"\u003e\n\u003cli data-start=\"1048\" data-end=\"1171\"\u003e\n\u003cp data-start=\"1050\" data-end=\"1171\"\u003e\u003cstrong data-start=\"1050\" data-end=\"1084\"\u003eComplete Fuel System Solution:\u003c\/strong\u003e Includes fuel rails, PTFE line kit, fittings, and Aeromotive fuel pressure regulator\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1172\" data-end=\"1243\"\u003e\n\u003cp data-start=\"1174\" data-end=\"1243\"\u003e\u003cstrong data-start=\"1174\" data-end=\"1203\"\u003eSupports High Horsepower:\u003c\/strong\u003e Proven to support builds over 1000 HP\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1244\" data-end=\"1320\"\u003e\n\u003cp data-start=\"1246\" data-end=\"1320\"\u003e\u003cstrong data-start=\"1246\" data-end=\"1265\"\u003eE85 Compatible:\u003c\/strong\u003e Safe for use with ethanol-based fuels, including E85\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1321\" data-end=\"1431\"\u003e\n\u003cp data-start=\"1323\" data-end=\"1431\"\u003e\u003cstrong data-start=\"1323\" data-end=\"1347\"\u003eNo Cutting Required:\u003c\/strong\u003e Pre-assembled PTFE hoses allow for direct installation without custom fabrication\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1432\" data-end=\"1545\"\u003e\n\u003cp data-start=\"1434\" data-end=\"1545\"\u003e\u003cstrong data-start=\"1434\" data-end=\"1458\"\u003eNon-Permeable Lines:\u003c\/strong\u003e PTFE construction prevents fuel vapor loss and resists ethanol degradation over time\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1546\" data-end=\"1660\"\u003e\n\u003cp data-start=\"1548\" data-end=\"1660\"\u003e\u003cstrong data-start=\"1548\" data-end=\"1571\"\u003eClean Installation:\u003c\/strong\u003e Designed for OEM or IAG TGV housings with sensors and motors—no modifications required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1661\" data-end=\"1827\"\u003e\n\u003cp data-start=\"1663\" data-end=\"1827\"\u003e\u003cstrong data-start=\"1663\" data-end=\"1683\"\u003eFlex Fuel Ready:\u003c\/strong\u003e Includes extra hoses and push-to-connect fittings for use with Continental flex fuel sensors (compatible with kits like COBB’s Flex Fuel Kit)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1952\" data-end=\"2049\"\u003ePTFE (Polytetrafluoroethylene) is a high-density, hydrophobic synthetic material known for its:\u003c\/p\u003e\n\u003cul data-start=\"2050\" data-end=\"2215\"\u003e\n\u003cli data-start=\"2050\" data-end=\"2082\"\u003e\n\u003cp data-start=\"2052\" data-end=\"2082\"\u003eSuperior chemical resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2083\" data-end=\"2113\"\u003e\n\u003cp data-start=\"2085\" data-end=\"2113\"\u003eHigh temperature tolerance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2114\" data-end=\"2168\"\u003e\n\u003cp data-start=\"2116\" data-end=\"2168\"\u003eNon-permeable and long-lasting fuel line integrity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2169\" data-end=\"2215\"\u003e\n\u003cp data-start=\"2171\" data-end=\"2215\"\u003eResistance to ethanol-based fuel corrosion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"2222\" data-end=\"2240\"\u003e\u003cstrong data-start=\"2227\" data-end=\"2240\"\u003eIncludes:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-start=\"2242\" data-end=\"2465\"\u003e\n\u003cli data-start=\"2242\" data-end=\"2298\"\u003e\n\u003cp data-start=\"2244\" data-end=\"2298\"\u003eIAG Billet Aluminum Fuel Rails (Black, Red, or Gold)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2299\" data-end=\"2332\"\u003e\n\u003cp data-start=\"2301\" data-end=\"2332\"\u003ePTFE Pre-Assembled Fuel Lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2333\" data-end=\"2382\"\u003e\n\u003cp data-start=\"2335\" data-end=\"2382\"\u003eAeromotive Adjustable Fuel Pressure Regulator\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2383\" data-end=\"2417\"\u003e\n\u003cp data-start=\"2385\" data-end=\"2417\"\u003eFittings and mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2418\" data-end=\"2465\"\u003e\n\u003cp data-start=\"2420\" data-end=\"2465\"\u003eExtra hose for flex fuel sensor integration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2472\" data-end=\"2486\"\u003e\u003cstrong data-start=\"2472\" data-end=\"2484\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2487\" data-end=\"2647\"\u003e\n\u003cli data-start=\"2487\" data-end=\"2515\"\u003e\n\u003cp data-start=\"2489\" data-end=\"2515\"\u003eSubaru EJ-Series Engines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2516\" data-end=\"2586\"\u003e\n\u003cp data-start=\"2518\" data-end=\"2586\"\u003eCompatible with OEM or IAG TGV housings (no modification required)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2587\" data-end=\"2647\"\u003e\n\u003cp data-start=\"2589\" data-end=\"2647\"\u003eCompatible with most aftermarket top-feed fuel injectors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IAG","offers":[{"title":"Default Title","offer_id":40406972072032,"sku":"IAG-AFD-2352BK","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/IAG-Black-PTFE-Flex-Fuel-System-Kit-w-Aeromotive-FPR-IAG-Fuel-Rails-WRX-08-14-STI-08-21-IAG-AFD-2352BK_a17682e1.jpg?v=1774372676"},{"product_id":"cobb344750-subaru-can-fuel-pressure-sensor-kit-wrx-6mt-2015-2021","title":"Cobb Subaru CAN Fuel Pressure Sensor Kit WRX 6MT 2015-2021 | 344750","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2015-2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA plug and play solution when using the COBB CAN Gateway enabling users to monitor low side Fuel Pressure on a Custom Accessport monitor.\u003c\/p\u003e\n\u003cp\u003eThe Fuel Pressure Sensor Kit uses OEM quality connectors, making fit and finish second to none. Included in this kit is a 0-100psi Fuel Pressure Sensor, a bespoke quick-disconnect billet adapter, and a wiring harness that allows for plug-and-play installation with the COBB CAN Gateway.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__article\"\u003eMonitoring Fuel Pressure is vital on any vehicle, especially those that are asking more of their fuel system. As demand on a fuel system increases so do the consequences of a failure. Monitoring fuel pressure will alert users if there is a fault in the vehicle's fuel system. Utilizing the COBB CAN Gateway, this CAN Fuel Pressure Sensor Kit allows users to monitor Low Side Fuel Pressure on 2015-2021 WRXs through a custom Accessport monitor\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Fuel Pressure Sensor Kit WRX 6MT 2015-2021\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003e0-100psi Pressure Sensor\u003c\/li\u003e\n\u003cli\u003e.5-4.5v Output Range with Error Reporting\u003c\/li\u003e\n\u003cli\u003eBillet Quick-disconnect Adapter\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Wiring Harness for CAN Gateway\u003c\/li\u003e\n\u003cli\u003eCompatible with COBB OTS Maps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40834787999840,"sku":"cobb344750","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-CAN-Fuel-Pressure-Sensor-Kit-WRX-6MT-2015-2021-344750.jpg?v=1743773046"},{"product_id":"cobb343650-subaru-can-flex-fuel-upgrade-wrx-2015-2017","title":"Cobb Subaru CAN Flex fuel upgrade WRX 2015-2017 | 343650","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2015-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe COBB CAN Gateway Flex Fuel Kit offers true plug-and-play installation and allows for seamless integration of flex fuel for supported vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Gateway\u003c\/strong\u003e\u003cbr\u003eThe included COBB CAN Gateway provides the means for aftermarket sensor data to be injected into your car's CAN system where it can be absorbed by the ECU and utilized in either a COBB Off The Shelf Map or custom calibration. The Gateway itself is constructed of billet aluminum encasing a precision manufactured PCB. A machined bracket allows for a straight-forward bolt-in installation on supported cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Specific Harness.\u003c\/strong\u003e\u003cbr\u003eEach CAN Gateway Kit includes a vehicle specific wiring harness. This specific kit is compatible with 2015-2017 WRXs and is NOT compatible with 2018-2021 WRXs. Please see Cobb's other CAN Gateway Kits for one that is compatible with your car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Ethanol Sensor Kit\u003c\/strong\u003e\u003cbr\u003eThe CAN Ethanol Sensor Kit includes an ethanol sensor with mounting bracket, fuel lines with quick connect fittings, and a wiring harness that connects to the CAN Gateway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note* - This kit is NOT compatible with 2018-2021 WRXs as they use a different wiring harness. Please configure your vehicle to see compatible CAN Gateway Kits.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThe COBB CAN Gateway Flex Fuel Kit for 2015-2021 Subaru WRXs measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in an Accessport delivered Flex Fuel calibration.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Flex Fuel Upgrade WRX 2015-2017\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCAN Ethanol Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Vehicle Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40834788065376,"sku":"cobb343650","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-CAN-Flex-fuel-upgrade-WRX-2015-2017-343650.jpg?v=1743856153"},{"product_id":"cobbsub004wcan1ffup-p-fp-subaru-previous-ethanol-sensor-kit-to-subaru-can-flex-fuel-upgrade-fuel-pressure-kit-wrx-2015-2017","title":"Cobb Subaru Previous Ethanol Sensor Kit to Subaru CAN Flex Fuel Upgrade + Fuel Pressure Kit WRX 2015-2017 | SUB004WCAN1FFUP-P-FP","description":"\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"accordion--simple__article\"\u003eSubaru WRX 2015-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThis upgrade kit includes the COBB CAN Gateway Module \u0026amp; Bracket with vehicle-specific harness in addition to Cobb's CAN Gateway Ethanol Content Sensor Harness, and a CAN Gateway Fuel Pressure Sensor Harness.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThis kit does not include an ethanol content sensor or fuel pressure sensor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelect this product if you have Cobb's previous Ethanol Sensor Kit and would like to upgrade to their new CAN Flex Fuel solution.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru Previous Ethanol Sensor Kit to Subaru CAN Flex Fuel Upgrade + CAN Fuel Pressure Upgrade Kit WRX 2015-2017\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCOBB CAN Gateway \u0026amp; Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Vehicle Harness\u003c\/li\u003e\n\u003cli\u003eCAN Gateway to Ethanol Sensor Harness\u003c\/li\u003e\n\u003cli\u003eCAN Gateway to Fuel Pressure Sensor Harness\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__article\"\u003eFor those of you who had Cobb's initial Flex Fuel \u0026amp; Fuel Pressure kits, this package allows you to adapt to Cobb's new CAN Gateway solution via plug-and-play harnesses. Simply remove the old analog wiring harness and replace it with the CAN Gateway Solution while retaining your existing Ethanol Content Sensor w\/ fuel lines and Fuel Pressure Sensor w\/ adapter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40834788098144,"sku":"cobbSUB004WCAN1FFUP-P-FP","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-Previous-Ethanol-Sensor-Kit-to-Subaru-CAN-Flex-Fuel-Upgrade-Fuel-Pressure-Kit-WRX-2015-2017-SUB004WCAN1FFUP-P-FP.jpg?v=1743773048"},{"product_id":"cobb343650-up-subaru-previous-ethanol-sensor-to-subaru-can-flex-fuel-upgrade-wrx-2015-2017","title":"Cobb Subaru Previous Ethanol Sensor to Subaru CAN Flex Fuel Upgrade WRX 2015-2017 | 343650-UP","description":"\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"accordion--simple__article\"\u003eSubaru WRX 2015-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThis kit includes the Subaru CAN Gateway Module with Harness \/ Bracket for WRX 6MT 2015-2017. This kit does not include the ethanol sensor.\u003c\/p\u003e\n\u003cp\u003eSelect this product if you have Cobb's previous Ethanol Sensor Kit and would like to upgrade to their new CAN Gateway \u003cspan style=\"font-size: 0.875rem;\"\u003eKit WRX.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__label\"\u003eCOBB Tuning Flex Fuel Upgrade Kit for Subaru measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in a Flex Fuel calibration.\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40834788163680,"sku":"cobb343650-UP","price":735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-Previous-Ethanol-Sensor-to-Subaru-CAN-Flex-Fuel-Upgrade-WRX-2015-2017-343650-UP.jpg?v=1744371589"},{"product_id":"cobbsub004wcan1ffup-fp-subaru-can-flex-fuel-upgrade-fuel-pressure-kit-wrx-2015-2017","title":"Cobb Subaru CAN Flex Fuel Upgrade + Fuel Pressure Kit WRX 2015-2017 | SUB004WCAN1FFUP-FP","description":"\u003cp class=\"accordion--simple__article\"\u003e\u003cstrong\u003eFitment Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2015-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThis upgrade kit includes the Subaru CAN Flex Fuel Upgrade Kit (CAN Gateway Module with Harness \/ Bracket and Ethanol Sensor), and the CAN Fuel Pressure Sensor Kit for the Subaru WRX 6MT 2015-2017.\u003c\/p\u003e\n\u003cp\u003eSelect this product if you already have a COBB Stage 1+ or NexGen Stage 2 Package, and would like to add Cobb's new CAN Flex Fuel Kit.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Flex Fuel Upgrade + Fuel Pressure Kit WRX 2015-2017\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eEthanol Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Harness\u003c\/li\u003e\n\u003cli\u003eCAN Fuel Pressure Sensor Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40834788196448,"sku":"cobbSUB004WCAN1FFUP-FP","price":1280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-CAN-Flex-Fuel-Upgrade-Fuel-Pressure-Kit-WRX-2015-2017-SUB004WCAN1FFUP-FP.jpg?v=1743856155"},{"product_id":"cobbsub004wcan2ffup-fp-subaru-can-flex-fuel-upgrade-fuel-pressure-kit-wrx-2018-2021","title":"Cobb Subaru CAN Flex Fuel Upgrade + Fuel Pressure Kit WRX 2018-2021 | SUB004WCAN2FFUP-FP","description":"\u003cp\u003e\u003cstrong\u003eFitment Information: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2018-2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThis upgrade kit includes the Subaru CAN Flex Fuel Upgrade Kit (CAN Gateway Module with Harness \/ Bracket and Ethanol Sensor), and the CAN Fuel Pressure Sensor Kit for the Subaru WRX 6MT 2018-2021.\u003c\/p\u003e\n\u003cp\u003eSelect this product if you already have a COBB Stage 1+ or NexGen Stage 2 Package, and would like to add Cobb's new CAN Flex Fuel Kit.\u003c\/p\u003e\n\u003ch4 id=\"features\" class=\"accordion--simple__label\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Flex Fuel Upgrade + Fuel Pressure Kit WRX 2018-2021\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eEthanol Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Harness\u003c\/li\u003e\n\u003cli\u003eCAN Fuel Pressure Sensor Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40837577572448,"sku":"cobbSUB004WCAN2FFUP-FP","price":1280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-CAN-Flex-Fuel-Upgrade-Fuel-Pressure-Kit-WRX-2018-2021-SUB004WCAN2FFUP-FP.jpg?v=1743700771"},{"product_id":"cobb344650-cobb-subaru-can-flex-fuel-upgrade-wrx-2018-2021","title":"Cobb Subaru CAN Flex Fuel Upgrade WRX 2018-2021 | 344650","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2018-2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe COBB CAN Gateway Flex Fuel Kit offers true plug-and-play installation and allows for seamless integration of flex fuel for supported vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Gateway\u003c\/strong\u003e\u003cbr\u003eThe included COBB CAN Gateway provides the means for aftermarket sensor data to be injected into your car's CAN system where it can be absorbed by the ECU and utilized in either a COBB Off The Shelf Map or custom calibration. The Gateway itself is constructed of billet aluminum encasing a precision manufactured PCB. A machined bracket allows for a straight-forward bolt-in installation on supported cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Specific Harness.\u003c\/strong\u003e\u003cbr\u003eEach CAN Gateway Kit includes a vehicle specific wiring harness. This specific kit is compatible with 2018-2021 WRXs and is NOT compatible with 2015-2017 WRXs. Please see Cobb's other CAN Gateway Kits for one that is compatible with your car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Ethanol Sensor Kit\u003c\/strong\u003e\u003cbr\u003eThe CAN Ethanol Sensor Kit includes an ethanol sensor with mounting bracket, fuel lines with quick connect fittings, and a wiring harness that connects to the CAN Gateway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note* - This kit is NOT compatible with 2015-2017 WRXs as they use a different wiring harness. Please configure your vehicle to see compatible CAN Gateway Kits.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThe COBB CAN Gateway Flex Fuel Kit for 2015-2021 Subaru WRXs measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in an Accessport delivered Flex Fuel calibration.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Flex Fuel Upgrade WRX 2018-2021\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCAN Ethanol Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40837577637984,"sku":"cobb344650","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-CAN-Flex-Fuel-Upgrade-WRX-2018-2021-344650.jpg?v=1743773049"},{"product_id":"cobbsub004wcan2ffup-p-fp-cobb-subaru-previous-ethanol-sensor-kit-to-subaru-can-flex-fuel-upgrade-can-fuel-pressure-upgrade-kit-wrx-2018-2021","title":"Cobb Subaru Previous Ethanol Sensor Kit to Subaru CAN Flex Fuel Upgrade + CAN Fuel Pressure Upgrade Kit WRX 2018-2021 | SUB004WCAN2FFUP-P-FP","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2018-2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThis upgrade kit includes the COBB CAN Gateway Module \u0026amp; Bracket with vehicle-specific harness in addition to Cobb's CAN Gateway Ethanol Content Sensor Harness, and a CAN Gateway Fuel Pressure Sensor Harness.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThis kit does not include an ethanol content sensor or fuel pressure sensor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelect this product if you have Cobb's previous Ethanol Sensor Kit and would like to upgrade to their new CAN Flex Fuel solution.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"why\"\u003eWHY?\u003c\/h4\u003e\n\u003cp class=\"accordion--simple__article\"\u003eFor those of you who had Cobb's initial Flex Fuel \u0026amp; Fuel Pressure kits, this package allows you to adapt to their new CAN Gateway solution via plug-and-play harnesses. Simply remove the old analog wiring harness and replace it with the CAN Gateway Solution while retaining your existing Ethanol Content Sensor w\/ fuel lines and Fuel Pressure Sensor w\/ adapter.\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru Previous Ethanol Sensor Kit to Subaru CAN Flex Fuel Upgrade + CAN Fuel Pressure Upgrade Kit WRX 2018-2021\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCOBB CAN Gateway \u0026amp; Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Vehicle Harness\u003c\/li\u003e\n\u003cli\u003eCAN Gateway to Ethanol Sensor Harness\u003c\/li\u003e\n\u003cli\u003eCAN Gateway to Fuel Pressure Sensor Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40837577736288,"sku":"cobbSUB004WCAN2FFUP-P-FP","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-Previous-Ethanol-Sensor-Kit-to-Subaru-CAN-Flex-Fuel-Upgrade-CAN-Fuel-Pressure-Upgrade-Kit-WRX-2018-2021-SUB004WCAN2FFUP-P-FP.jpg?v=1743773051"},{"product_id":"cobb344650-up-cobb-subaru-previous-ethanol-sensor-kit-to-subaru-can-flex-fuel-upgrade-wrx-2018-2021","title":"Cobb Subaru Previous Ethanol Sensor Kit to Subaru CAN Flex Fuel Upgrade WRX 2018-2021 | 344650-UP","description":"\u003cp\u003e\u003cstrong\u003eFitment Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX 2018-2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe COBB CAN Gateway Flex Fuel Kit offers true plug-and-play installation and allows for seamless integration of flex fuel for supported vehicles.\u003cspan\u003eThis kit includes the Subaru CAN Gateway Module with Harness \/ Bracket for WRX 6MT 2018-2021. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eThis kit does not include the ethanol sensor. Select this product if you have our previous Ethanol Sensor Kit and would like to upgrade to our new CAN Gateway Kit WRX.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Gateway\u003c\/strong\u003e\u003cbr\u003eThe included COBB CAN Gateway provides the means for aftermarket sensor data to be injected into your car's CAN system where it can be absorbed by the ECU and utilized in either a COBB Off The Shelf Map or custom calibration. The Gateway itself is constructed of billet aluminum encasing a precision manufactured PCB. A machined bracket allows for a straight-forward bolt-in installation on supported cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Specific Harness.\u003c\/strong\u003e\u003cbr\u003eEach CAN Gateway Kit includes a vehicle specific wiring harness. This specific kit is compatible with 2018-2021 WRXs and is \u003cstrong\u003eNOT\u003c\/strong\u003e compatible with 2015-2017 WRXs. Please see Cobb's other CAN Gateway Kits for one that is compatible with your car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Ethanol Sensor Kit\u003c\/strong\u003e\u003cbr\u003eThe CAN Ethanol Sensor Kit includes an ethanol sensor with mounting bracket, fuel lines with quick connect fittings, and a wiring harness that connects to the CAN Gateway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note* - This kit is NOT compatible with 2015-2017 WRXs as they use a different wiring harness.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 class=\"accordion--simple__label\" id=\"features\"\u003eFEATURES\u003c\/h4\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003eSubaru CAN Flex Fuel Upgrade WRX 2018-2021\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Bracket\u003c\/li\u003e\n\u003cli\u003eCAN Gateway Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":40837577801824,"sku":"cobb344650-UP","price":735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Subaru-Previous-Ethanol-Sensor-Kit-to-Subaru-CAN-Flex-Fuel-Upgrade-WRX-2018-2021-344650-UP_0a54f5e0.jpg?v=1744371613"},{"product_id":"cobb-22-24-subaru-wrx-can-fuel-pressure-kit","title":"Cobb CAN Fuel Pressure Kit Subaru WRX 2022-2026 \/ Subaru Ascent 2023-2025 | 346700","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2022-2026 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e2023-2025 Subaru Ascent\u003c\/p\u003e\n\u003cp\u003e*Works with Manual and CVT Transmission\u003c\/p\u003e\n\u003cp\u003eA plug and play solution when using the COBB CAN Gateway enabling users to monitor low side Fuel Pressure on a Custom Accessport monitor.\u003c\/p\u003e\n\u003cp\u003eThe Fuel Pressure Sensor Kit uses OEM quality connectors, making fit and finish second to none. Included in this kit is a 0-100psi Fuel Pressure Sensor, a bespoke quick-disconnect billet adapter, and a wiring harness that allows for plug-and-play installation with the COBB CAN Gateway.\u003c\/p\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003eMonitoring Fuel Pressure is vital on any vehicle, especially those that are asking more of their fuel system. As demand on a fuel system increases so do the consequences of a failure. Monitoring fuel pressure will alert users if there is a fault in the vehicles' fuel system. Utilizing the COBB CAN Gateway, this CAN Fuel Pressure Sensor Kit allows users to monitor Low Side Fuel Pressure on 2022-2024 WRXs through a custom Accessport monitor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003chr\u003e\n\u003cstrong\u003e\u003cb\u003eCOBB CAN Fuel Pressure Sensor Kit Subaru WRX 2022-2026\u003c\/b\u003e\u003c\/strong\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003e0-100psi Pressure Sensor\u003c\/li\u003e\n\u003cli\u003e.5-4.5v Output Range with Error Reporting\u003c\/li\u003e\n\u003cli\u003eBillet Quick-disconnect Adapter\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Wiring Harness for CAN Gateway\u003c\/li\u003e\n\u003cli\u003eCompatible with COBB OTS Maps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"accordion--simple__article text-l\"\u003eThis part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) and Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.\n\u003cp\u003e\u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e\u003c\/p\u003e\nTesting with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":41608980463712,"sku":"cobb346700","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-CAN-Fuel-Pressure-Kit-Subaru-WRX-2022-2026-Subaru-Ascent-2023-2025-346700.jpg?v=1769093506"},{"product_id":"cobb-22-24-subaru-wrx-stage-1-to-stage-1-can-flex-fuel-power-package-mt-upgrade-only","title":"Cobb Stage 1 to Stage 1+ CAN Flex Fuel Power Package UPGRADE ONLY Subaru WRX 2022-2026 | SUB0060010-FF-UPGRADE","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2022-2026 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e*Works with Manual and CVT Transmission\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Subaru Stage 1 to Stage 1 + CAN Flex Fuel Power Package includes the CAN Flex Fuel Upgrade, the CAN Fuel Pressure Sensor Kit for 2022-2026 Subaru WRX. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003eDo you already have the COBB Stage 1 Power Package for your WRX and want to add flex fuel capabilities into the mix? If so, you're in the right place!\u003cbr\u003eThe Stage 1 to Stage 1 + CAN Flex Fuel Package includes everything you need to add flex fuel tuning to your VB WRX! This package includes both the CAN Flex Fuel Upgrade \u0026amp; CAN Fuel Pressure Sensor Kit which makes flex fuel tuning a plug-and-play affair for your 2022+ WRX!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cstrong\u003e\u003cb\u003eCOBB Stage 1 to Stage 1 + CAN Flex Fuel Power Package Upgrade Subaru WRX 2022-2026\u003c\/b\u003e\u003c\/strong\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCOBB CAN Gateway \u0026amp; Bracket\u003c\/li\u003e\n\u003cli\u003eCOBB CAN Ethanol Content Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCOBB CAN Fuel Pressure Sensor Kit\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Plan Installation\u003c\/li\u003e\n\u003cli\u003eSupported by COBB Off The Shelf Maps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eSelect this product if you have Cobb's Stage 1 Package (Accessport and High Flow Filter) and would like to upgrade to their new Stage 1 + CAN Flex Fuel Power Package.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) and Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTesting with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":41608980529248,"sku":"cobbSUB0060010-FF-UPGRADE","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Stage-1-to-Stage-1-CAN-Flex-Fuel-Power-Package-UPGRADE-ONLY-Subaru-WRX-2022-2026-SUB0060010-FF-UPGRADE.jpg?v=1769093513"},{"product_id":"cobb-22-24-subaru-wrx-can-flex-fuel-upgrade-mt-only","title":"Cobb CAN Flex Fuel Upgrade Subaru WRX 2022-2025 | 345650","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2022-2025 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e*Works with both manual and cvt transmission\u003c\/p\u003e\n\u003cp\u003eThe COBB CAN Gateway Flex Fuel Upgrade offers true plug-and-play installation and allows for seamless integration of flex fuel for supported vehicles.\u003c\/p\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThe COBB CAN Gateway Flex Fuel Upgrade for 2022-2025 Subaru WRXs measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in an Accessport delivered Flex Fuel calibration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cstrong\u003e\u003cb\u003eCOBB CAN Flex Fuel Upgrade Subaru WRX 2022-2025\u003c\/b\u003e\u003c\/strong\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eCOBB Ethanol Sensor \u0026amp; Harness\u003c\/li\u003e\n\u003cli\u003eCOBB CAN Gateway Module\u003c\/li\u003e\n\u003cli\u003eCAN Gateway \/ Ethanol Sensor Bracket\u003c\/li\u003e\n\u003cli\u003eCOBB Vehicle CAN Integration Harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Gateway\u003c\/strong\u003e\u003cbr\u003eThe included COBB CAN Gateway provides the means for aftermarket sensor data to be injected into your car's CAN system where it can be absorbed by the ECU and utilized in either a COBB Off The Shelf Map or custom calibration. The Gateway itself is constructed of billet aluminum encasing a precision manufactured PCB. The included bracket allows for a straight-forward bolt-in installation on supported cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Specific Harness\u003c\/strong\u003e\u003cbr\u003eEach CAN Gateway Kit includes a vehicle specific wiring harness. This specific kit is compatible with 2022-2024 WRXs. It consists of a cable that runs into the cabin and utilizes our CAN adapter which allows integration to be a plug-and-play affair. Installation of this component requires removal of your car's Radio\/Cockpit Control Unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN Ethanol Sensor Kit\u003c\/strong\u003e\u003cbr\u003eThe CAN Ethanol Sensor Kit includes an ethanol sensor with mounting bracket, fuel lines with quick connect fittings, and a wiring harness that connects to the CAN Gateway.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) and Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTesting with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":41608980594784,"sku":"cobb345650","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-CAN-Flex-Fuel-Upgrade-Subaru-WRX-2022-2025-345650.jpg?v=1769257726"},{"product_id":"cobb-22-24-subaru-wrx-stage-1-can-flex-fuel-power-package-mt-only","title":"Cobb Stage 1+ CAN Flex Fuel Power Package Subaru WRX 2022-2026 | SUB0060010-FF","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2022-2026 Subaru WRX\u003c\/p\u003e\n\u003cp\u003e*Works with Manual and CVT Transmission\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Stage 1+ CAN Flex Fuel Power Package includes an Accessport V3, COBB High Flow Panel Filter, CAN Flex Fuel Upgrade, and the CAN Fuel Pressure Sensor Kit for 2022-2026 Subaru WRX. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cp class=\"accordion--simple__article\"\u003eThe Stage 1+ CAN Flex Fuel Power Package includes everything you need to take advantage of E85\/ethanol tuning for your 2022-2026 Subaru WRX!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"section--region\"\u003e\n\u003cdiv class=\"accordion--simple\"\u003e\n\u003cdiv class=\"accordion--simple__article\"\u003e\n\u003cstrong\u003e\u003cb\u003eCOBB Stage 1 + CAN Flex Fuel Power Package Subaru WRX\u003c\/b\u003e\u003c\/strong\u003e\n\u003cul class=\"no-b-margin\"\u003e\n\u003cli\u003eAccessport V3 (SUB-006)\u003c\/li\u003e\n\u003cli\u003eCOBB High Flow Panel Filter\u003c\/li\u003e\n\u003cli\u003eCAN Flex Fuel Upgrade\u003c\/li\u003e\n\u003cli\u003eCAN Fuel Pressure Sensor Kit\u003c\/li\u003e\n\u003cli\u003eCompatible with OTS Maps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) and Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTesting with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":41609026076768,"sku":"cobbSUB0060010-FF","price":2075.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Stage-1-CAN-Flex-Fuel-Power-Package-Subaru-WRX-2022-2026-SUB0060010-FF.jpg?v=1769093542"},{"product_id":"cobb-nexgen-flex-fuel-ethanol-sensor-kit-subaru-wrx-2011-2014-324650","title":"Cobb NexGen Flex Fuel Ethanol Sensor Kit Subaru WRX 2011-2014 | 324650","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2011-2014 Subaru WRX\u003c\/p\u003e\n\u003cp data-start=\"312\" data-end=\"623\"\u003eUnlock full flex-fuel capability on your Subaru WRX with COBB’s all-in-one solution. The NexGen Flex Fuel Ethanol Sensor Kit integrates seamlessly with your vehicle’s ECU to monitor ethanol content in real time—enabling safe use of E85 (or variable ethanol blends) and maximizing performance without compromise.\u003c\/p\u003e\n\u003ch4 data-start=\"625\" data-end=\"651\"\u003e\u003cstrong data-start=\"630\" data-end=\"649\"\u003eWhat’s Included\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-start=\"652\" data-end=\"1097\"\u003e\n\u003cli data-start=\"652\" data-end=\"714\"\u003e\n\u003cp data-start=\"654\" data-end=\"714\"\u003eEthanol content sensor with powder-coated aluminum bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"715\" data-end=\"808\"\u003e\n\u003cp data-start=\"717\" data-end=\"808\"\u003eFuel lines pre-assembled with OE-quality quick-disconnect fittings for factory fuel rails\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"809\" data-end=\"893\"\u003e\n\u003cp data-start=\"811\" data-end=\"893\"\u003eBillet adapter to allow integration with COBB Fuel Rail Line Kit (if applicable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"894\" data-end=\"1014\"\u003e\n\u003cp data-start=\"896\" data-end=\"1014\"\u003eNexGen Flex Module mounted to the passenger side strut tower for data processing and relaying ethanol content to ECU\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1015\" data-end=\"1097\"\u003e\n\u003cp data-start=\"1017\" data-end=\"1097\"\u003ePlug-and-play wiring harness using OE-quality connectors for easy installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1099\" data-end=\"1133\"\u003e\u003cstrong data-start=\"1104\" data-end=\"1131\"\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-start=\"1134\" data-end=\"1890\"\u003e\n\u003cli data-start=\"1134\" data-end=\"1327\"\u003e\n\u003cp data-start=\"1136\" data-end=\"1327\"\u003e\u003cstrong data-start=\"1136\" data-end=\"1166\"\u003eReal-Time Ethanol Sensing:\u003c\/strong\u003e Continuously measures ethanol content of the fuel being fed to the engine and sends the data to your ECU so you can run flex-fuel calibrations with confidence\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1328\" data-end=\"1462\"\u003e\n\u003cp data-start=\"1330\" data-end=\"1462\"\u003e\u003cstrong data-start=\"1330\" data-end=\"1355\"\u003eSeamless Integration:\u003c\/strong\u003e Designed for WRX models (2011-2014) with full compatibility for COBB NexGen Flex Fuel off-the-shelf maps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1463\" data-end=\"1632\"\u003e\n\u003cp data-start=\"1465\" data-end=\"1632\"\u003e\u003cstrong data-start=\"1465\" data-end=\"1493\"\u003eHigh-Quality Components:\u003c\/strong\u003e From the billet adapter to OE-style quick-disconnect fittings, the kit delivers reliable construction built for performance environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1633\" data-end=\"1890\"\u003e\n\u003cp data-start=\"1635\" data-end=\"1890\"\u003e\u003cstrong data-start=\"1635\" data-end=\"1672\"\u003eStreet Legal (Except California):\u003c\/strong\u003e The product is legal under EPA’s Anti-Tampering Policy for sale and use on-street in all states that accept the Clean Air Act provisions. Not legal for sale or use in California on emission-controlled motor vehicles\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-start=\"1892\" data-end=\"1915\"\u003e\u003cstrong data-start=\"1897\" data-end=\"1913\"\u003eApplications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-start=\"1916\" data-end=\"2233\"\u003e\n\u003cli data-start=\"2001\" data-end=\"2118\"\u003e\n\u003cp data-start=\"2003\" data-end=\"2118\"\u003eIdeal for owners planning to run E85 or ethanol-variable fueling, staging upgrades, or adaptive tuning strategies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2119\" data-end=\"2233\"\u003e\n\u003cp data-start=\"2121\" data-end=\"2233\"\u003eWorks best when paired with COBB Accessport and a NexGen Flex Fuel map for maximum performance and reliability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2615\" data-end=\"2992\"\u003eWhen you run ethanol blends, the variable ethanol content can throw off fuel trims, timing, and overall engine stability. This kit ensures your ECU knows exactly what it’s dealing with — allowing the calibration to adjust fuel and ignition strategy accordingly. That means you can take advantage of ethanol’s performance benefits while maintaining safe, consistent operation.\u003c\/p\u003e\n\u003cp data-start=\"2994\" data-end=\"3176\"\u003eWhether you’re on the street, track, or running variable fuel blends, the COBB NexGen Flex Fuel Ethanol Sensor Kit gives your Subaru the intelligence it needs to perform confidently.\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":42355194593376,"sku":"cobb324650","price":725.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-NexGen-Flex-Fuel-Ethanol-Sensor-Kit-Subaru-WRX-2011-2014-324650.jpg?v=1761127280"},{"product_id":"cobb-ethanol-sensor-and-fuel-line-kit-subaru-wrx-2011-2014-324260","title":"Cobb Ethanol Sensor and Fuel Line Kit Subaru WRX 2011-2014 | 324260","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2011-2014 Subaru WRX\u003c\/p\u003e\n\u003cp data-end=\"503\" data-start=\"158\"\u003eUnlock true Flex Fuel capability with the COBB Ethanol Sensor \u0026amp; Fuel Line Kit, designed as a \u003cstrong data-end=\"284\" data-start=\"258\"\u003eplug-and-play solution\u003c\/strong\u003e for the 2011–2014 Subaru WRX. This kit serves as the core of the NexGen Flex Fuel system, delivering precise ethanol content readings so your ECU can make real-time adjustments for performance, safety, and reliability.\u003c\/p\u003e\n\u003cp data-end=\"875\" data-start=\"505\"\u003eAt the center of the setup is an \u003cstrong data-end=\"575\" data-start=\"538\"\u003eOE-quality ethanol content sensor\u003c\/strong\u003e mounted to a durable, powder-coated aluminum bracket. Fuel is routed seamlessly through the included \u003cstrong data-end=\"705\" data-start=\"677\"\u003epre-assembled fuel lines\u003c\/strong\u003e, each equipped with OEM-style quick disconnects for a secure, leak-free fit. A billet adapter is also included to ensure smooth integration into the factory fuel system.\u003c\/p\u003e\n\u003cp data-end=\"1084\" data-start=\"877\"\u003eThe result is a fully compatible, clean, and efficient installation that brings accurate ethanol monitoring directly to your ECU — a must-have for anyone running E85, blends, or a full Flex Fuel calibration.\u003c\/p\u003e\n\u003ch3 data-end=\"1106\" data-start=\"1086\"\u003e\u003cstrong data-end=\"1106\" data-start=\"1090\"\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1465\" data-start=\"1107\"\u003e\n\u003cli data-end=\"1180\" data-start=\"1107\"\u003e\n\u003cp data-end=\"1180\" data-start=\"1109\"\u003eOE-quality ethanol content sensor with powder-coated mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1237\" data-start=\"1181\"\u003e\n\u003cp data-end=\"1237\" data-start=\"1183\"\u003ePlug-and-play wiring harness for simple installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1288\" data-start=\"1238\"\u003e\n\u003cp data-end=\"1288\" data-start=\"1240\"\u003ePre-made fuel lines with OEM quick disconnects\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1345\" data-start=\"1289\"\u003e\n\u003cp data-end=\"1345\" data-start=\"1291\"\u003eBillet adapter for seamless factory line integration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1414\" data-start=\"1346\"\u003e\n\u003cp data-end=\"1414\" data-start=\"1348\"\u003eEnables accurate ethanol content monitoring for Flex Fuel tuning\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":42375922679904,"sku":"cobb324260","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-Ethanol-Sensor-and-Fuel-Line-Kit-Subaru-WRX-2011-2014-324260.jpg?v=1764860787"},{"product_id":"cobb-nexgen-flex-fuel-upgrade-fuel-pressure-kit-subaru-wrx-2011-2014-nexgenff002","title":"Cobb NexGen Flex Fuel Upgrade + Fuel Pressure Kit Subaru WRX 2011-2014 | NEXGENFF002","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2011-2014 Subaru WRX \u003c\/p\u003e\n\u003cp data-end=\"932\" data-start=\"490\"\u003eTake full control of your fuel system and embrace high‑ethanol performance with the COBB NexGen Flex Fuel Upgrade + Fuel Pressure Kit for the WRX 2011‑2014. Specifically developed for Subaru’s turbocharged boxer engines, this comprehensive kit integrates an ethanol content sensor, fuel pressure sensor, wiring harness, and dedicated module—everything required to reliably switch between gasoline and E85 or manage higher‑performance demands.\u003c\/p\u003e\n\u003cp data-end=\"953\" data-start=\"934\"\u003e\u003cstrong data-end=\"951\" data-start=\"934\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"2024\" data-start=\"954\"\u003e\n\u003cli data-end=\"1109\" data-start=\"954\"\u003e\n\u003cp data-end=\"1109\" data-start=\"956\"\u003eEthanol Content Sensor \u0026amp; powder‑coated aluminum bracket for secure mounting and accurate measurement of fuel mix. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" rel=\"noopener\" href=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1296\" data-start=\"1110\"\u003e\n\u003cp data-end=\"1296\" data-start=\"1112\"\u003eFuel Pressure Sensor (0‑100 PSI) including billet adapter and quick‑connect fittings to integrate seamlessly with the existing fuel rail system. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" rel=\"noopener\" href=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1483\" data-start=\"1297\"\u003e\n\u003cp data-end=\"1483\" data-start=\"1299\"\u003eNexGen Module with plug‑and‑play wiring harness built to factory‑style standards, enabling ECU calibration to use the ethanol and pressure data. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" rel=\"noopener\" href=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1651\" data-start=\"1484\"\u003e\n\u003cp data-end=\"1651\" data-start=\"1486\"\u003eSupports COBB Accessport OTS (Off The Shelf) maps or custom tuning paths to leverage ethanol’s higher octane for power gains. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" rel=\"noopener\" href=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2024\" data-start=\"1801\"\u003e\n\u003cp data-end=\"2024\" data-start=\"1803\"\u003eIncludes emissions‑compliance notice: legal in many states under the EPA Anti‑Tampering Policy; \u003cstrong data-end=\"1942\" data-start=\"1899\"\u003enot legal for sale or use in California\u003c\/strong\u003e until 50‑state certification is obtained.\u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" rel=\"noopener\" href=\"https:\/\/www.cobbtuning.com\/products\/fuel-system\/subaru-nexgen-flex-fuel-upgrade-fuel-pressure-kit-wrx-2011-2014\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2563\" data-start=\"2026\"\u003eIf you're building for performance, consider running E85 (which has higher octane and often lower cost) or simply want more robust fuel system monitoring, this kit is the next step. By adding both ethanol content sensing and proper fuel pressure measurement you reduce risk of knock, mis‑fueling, or inadequate fueling under boost. It’s especially valuable for turbocharged Subarus where fuel demand rises quickly. The kit’s comprehensive nature ensures you’re covered both in hardware and calibration support.\u003c\/p\u003e","brand":"Cobb Tuning","offers":[{"title":"Default Title","offer_id":42379407687776,"sku":"cobbNEXGENFF002","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/Cobb-NexGen-Flex-Fuel-Upgrade-Fuel-Pressure-Kit-Subaru-WRX-2011-2014-NEXGENFF002.jpg?v=1762005455"}],"url":"https:\/\/www.importimageracing.com\/collections\/fuel-packages.oembed","provider":"Import Image Racing","version":"1.0","type":"link"}