Skunk2 Tuner Series Stage 1 Cam Shafts Honda/Acura K20A/ A2/ Z1/ Z3 & K24A2 DOHC i-VTEC 2.0L

Skunk2
skk305-05-0220
5 In stock
Engine Camshafts and Gears

🚀 If you were a VIP member, you'd be getting $35.00 in BuildBUX for buying this part 🤷 Join us!
$734.99 $699.99
0% Financing for 12 months with Affirm!


Delivery Estimate: Order within hours minutes and use Fastrak at Checkout



WTF are Build Bux?
$699.99

305-05-0220

For your 

  • 2006 - 2011 Honda Civic (2.0L Si)
  • 2002 - 2006 Acura RSX (2.0L Type S)
  • 2004 - 2008 Acura TSX (2.4L Base K24A2)

Skunk2 Racing's "Tuner Stage 1" Camshafts are designed as a performance upgrade to stock or near stock vehicles running the 3 Lobe VTEC K20A/ K20A2/ K20Z1/ K20Z3 and K24A2 engines or cylinder heads. These camshafts will outperform the stock and Skunk2 DIC (Drop-In Camshaft) camshaft from 4,500 rpm to redline with no loss in drivability. A great match for vehicles with an intake, header, and exhaust! Tuner Stage 1's require a simple valve spring and retainer upgrade due to the additional lift, duration and increased RPM range.

Tuner Stage 1's incorporate Skunk2 Racing's cutting-edge Fast Ramp and AMAX features, which are responsible for increasing overall performance, producing unmatched response from idle to redline. You can expect optimized mid-range and top-end horsepower/torque with peak power moved up the RPM band, producing a seamless VTEC crossover!

  • Fast Ramp - The same technology used in Formula One racing, where seat timing is reduced, which results in additional cylinder pressure and more torque but without compromising valve-train longevity.
  • AMAX - A Skunk2 design that simply maximizes the area under the lift curve but without compromising reliability or valve-train stability. Skunk2’s profiles feature more duration than competitors’ at lifts above 1mm, resulting in greater efficiency and more power.

 

Independent tests have shown average gains to be in the neighborhood of +18-20 horsepower with really nice gains in mid-range horsepower and torque! Tuner Stage 1 cams are an easy install but we highly recommend checking all critical clearances and degreeing for peak performance.

Required - Alpha Series Valve Springs, Alpha Titanium Retainers and Engine Management.

Camshafts Specifications

  • Intake - Lift: 13.5mm/ Duration 266°
  • Exhaust - Lift: 12.5mm/ Duration 262°
  • Intake Centerline - Variable
  • Exhaust Centerline - 107°
  • Valve Clearance (Intake / Exhaust) - .008” / .010”
  • RPM Range: 1,500 - 8,200
  • HP Gains: 18-20
  • Torque Gains: 15-18
  • i-VTEC Settings - Small Lobe 35° Advance/ Big Lobe 40° to 30° Advance
  • VTEC Crossover - 5,500 to 6,500 RPM
Skunk2 Tuner Series Stage 1 Cam Shafts Honda/Acura K20A/ A2/ Z1/ Z3 & K24A2 DOHC i-VTEC 2.0L
You have successfully subscribed!
This email has been registered
x