Skunk2 Pro Series Stage 3+ Cam Shafts Honda B VTEC | 305-05-5150

305-05-5150

For your

• 1999 - 2000 Honda Civic (1.6L Si)
• 1994 - 1997 Honda Del Sol (1.6L VTEC)
• 1992 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)

Gain an extra 25+ hp and destroy the track with Skunk2's aggressive Pro Series Stage 3 Camshafts. Tuner Series Stage 3 Camshafts are designed to optimize high RPM horsepower and torque on well modified engines, these are not ideal for the street and are optimal for high RPM use only. Springs and retainers are required. These cams are for built motors ONLY! When using camshafts with greater than 12.6mm of lift, the following components must be used due to the stock lost motion assembly's limited ability for maximum camshaft lift. Failure to do say may result in potential engine damage.

REQUIREMENTS:
Adjustable Cam Gears
Pro Series Valve Springs
Titanium Retainers
Lost Motion Assembly
Cam Degreeing
Valve to Valve Clearance Inspection
Valve to Piston Clearance Inspection

RECOMMENDATIONS:

High Compression
Engine Management
Deep Valve Pockets

CAM SPECS:

Intake Duration / Lift: 272° / 12.7mm
Exhaust Duration / Lift: 277° / 11.93mm
Intake Centerline: 100°
Exhaust Centerline: 104°
Valve Clearance (Intake / Exhaust): .007” / .008”
RPM Range: 1,500 - 9,800 rpm
HP Gains: 25+ hp
Torque Gains: 18 - 22 lb-ft

NOTE: When using camshafts with greater than 12.6mm of lift, the following components must be used due to the stock lost motion assembly coil bind limits. Failure to do say may result in potential engine damage/ failure.

Skunk2 Pro Series Valve Springs (P/N 311-05-7350)
Skunk2 B-Series VTEC Lost Motion Assembly (P/N 312-05-0200)