{"product_id":"iag-1150-2-35l-destroked-long-block-2018-2019-sti-type-ra-2019-sti-gsc-s3-camshaft-upgrade-iag-eng-l113n3","title":"IAG 1150 2.35L Destroked Long Block w\/ IAG 1150 Heads \u0026 GSC S3 Camshafts Subaru STI 2019-2021 \/ STI Type RA 2018 | IAG-ENG-L113N3","description":"\u003cp\u003e\u003cstrong\u003eProduct Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2018 Subaru WRX STI Type RA\u003c\/p\u003e\n\u003cp\u003e2019-2021 Subaru WRX STI\u003c\/p\u003e\n\u003cp\u003eThe IAG 1150 2.35L Destroked Long Block Engine with IAG 1150 Heads is a complete, valve-cover-to-valve-cover timed crate engine, built around IAG's 1150 closed-deck short block. It is a direct drop-in replacement for the factory EJ25, engineered to support up to 1150 BHP with a maximum recommended rev limit of 9,000 RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShort Block\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 2.35L destroked closed-deck short block starts with brand-new Subaru OEM case halves, machined for 14mm head studs and 9.5mm pinned mains, then line honed. IAG adds closed-deck inserts with small coolant passages, IAG Fire-Lock receiver groove machining, case bolt reinforcement plugs, and ARP case bolts. Inside, an IAG-Spec billet 75mm crankshaft pairs with custom IAG-Spec +2mm Tri-Beam forged connecting rods secured by ARP 625+ rod bolts, JE 99.75mm FSR 2618 forged pistons with electroless nickel plating, a JE Pro Seal ring set, and .240\" H13 tool steel wrist pins. Compression is 8.2:1, and the rotating assembly rides on ACL Race rod and main bearings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCylinder Heads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IAG 1150 heads start as brand-new WRX STI OEM head castings from Subaru of America. They are Centroid 5-axis CNC ported, with cam clearance machining, and drilled for 1\/2\" or 14mm head studs. The decks are resurfaced on the TS-3000 BlockMate and the heads are ultrasonically cleaned. Each head receives GSC Manganese-Bronze valve guides that are diamond-honed, a Newen multi-angle valve job for Ferrea +1mm valves, Ferrea Comp Plus Valves, GSC Viton Valve Stem Seals, upgraded GSC valve guides, Ferrea Dual Drag Valve Springs with Titanium Retainers, and Ferrea Keepers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamshafts — GSC S3 Upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis variant is fitted with GSC Power-Division billet S3 camshafts. If you're targeting maximum power over 1000 WHP and willing to give up some low-end drivability, the GSC S3 cams are the way to go. PLEASE NOTE THAT THESE CAMS REQUIRE A STANDALONE ECU AND MAY NOT FUNCTION CORRECTLY WHEN AVCS IS USED. Along with the camshafts, we'll include all new Kelford DLC Coated valve lifter buckets and set valve lash so the engine will be ready to install and run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete valve-cover-to-valve-cover timed crate engine — drop-in for the factory EJ25\u003c\/li\u003e\n\u003cli\u003eSupports up to 1150 BHP; maximum recommended rev limit 9,000 RPM\u003c\/li\u003e\n\u003cli\u003e2.35L destroked closed-deck short block with IAG-Spec billet 75mm crankshaft\u003c\/li\u003e\n\u003cli\u003eCustom IAG-Spec +2mm Tri-Beam forged connecting rods with ARP 625+ rod bolts\u003c\/li\u003e\n\u003cli\u003eJE 99.75mm FSR 2618 forged pistons, JE Pro Seal rings, .240\" H13 tool steel wrist pins; 8.2:1 compression\u003c\/li\u003e\n\u003cli\u003eACL Race rod and main bearings\u003c\/li\u003e\n\u003cli\u003eIAG Fire-Lock receiver groove machining and case bolt reinforcement plugs\u003c\/li\u003e\n\u003cli\u003eBrand-new WRX STI OEM head castings, Centroid 5-axis CNC ported\u003c\/li\u003e\n\u003cli\u003eFerrea Comp Plus Valves, GSC Viton Valve Stem Seals, upgraded GSC valve guides, Ferrea Dual Drag Valve Springs with Titanium Retainers, Ferrea Keepers\u003c\/li\u003e\n\u003cli\u003eGSC Power-Division billet S3 camshafts with Kelford DLC Coated valve lifter buckets and valve lash set — requires a standalone ECU and may not function correctly when AVCS is used\u003c\/li\u003e\n\u003cli\u003eMachined for 14mm head studs and 9.5mm pinned mains, line honed; ARP case bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProfessional installation is required. The installing mechanic must swap over the external components from the original engine, including the intake and exhaust manifolds, turbocharger, fuel pump, injectors, and more. Please review IAG's after-sale document, which contains shipping, engine care and warranty information: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0828\/8623\/0234\/files\/Engine-After-Sale-Shipping-Doc.pdf\"\u003eEngine After-Sale Shipping Document (PDF)\u003c\/a\u003e. Product video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=tzKnCsSDhTk\"\u003eIAG 1150 Cylinder Heads\u003c\/a\u003e. Break-in video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=ogInIZNmKo8\"\u003eHow to Break-In a Built Engine PROPERLY\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIAG Standard Long Block Workmanship Warranty: 12 months \/ 12,000 miles. IAG Certified Installation Facilities offer up to a 24 month \/ 24,000 mile workmanship warranty when the engine is purchased, installed, and tuned by that IAG Certified Installer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplacement: 2.35L destroked\u003c\/li\u003e\n\u003cli\u003eMaximum power: up to 1150 BHP\u003c\/li\u003e\n\u003cli\u003eMaximum recommended rev limit: 9,000 RPM\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 8.2:1\u003c\/li\u003e\n\u003cli\u003eCase halves: brand-new Subaru OEM case halves\u003c\/li\u003e\n\u003cli\u003eCrankshaft: IAG-Spec billet 75mm crankshaft\u003c\/li\u003e\n\u003cli\u003eConnecting rods: custom IAG-Spec +2mm Tri-Beam forged rods, ARP 625+ rod bolts\u003c\/li\u003e\n\u003cli\u003ePistons: JE 99.75mm FSR 2618 custom pistons, .240\" \/ .906\" H13 wrist pins, JE Pro Seal ring set\u003c\/li\u003e\n\u003cli\u003eRod \/ main bearings: ACL Race Bearings\u003c\/li\u003e\n\u003cli\u003eCase \/ main bolts: ARP case bolts\u003c\/li\u003e\n\u003cli\u003ePinned mains: machined for 9.5mm pinned mains, line honed\u003c\/li\u003e\n\u003cli\u003eFire-Lock: IAG Fire-Lock receiver groove machining\u003c\/li\u003e\n\u003cli\u003eHead studs: machined for 14mm head studs\u003c\/li\u003e\n\u003cli\u003eCylinder heads: brand-new WRX STI OEM head castings, Centroid 5-axis CNC ported\u003c\/li\u003e\n\u003cli\u003eValves: Ferrea Comp Plus Valves, +1mm\u003c\/li\u003e\n\u003cli\u003eValve springs: Ferrea Dual Drag Valve Springs with Titanium Retainers, Ferrea Keepers\u003c\/li\u003e\n\u003cli\u003eValve guides: GSC Manganese-Bronze valve guides, diamond-honed\u003c\/li\u003e\n\u003cli\u003eValve stem seals: GSC Viton Valve Stem Seals\u003c\/li\u003e\n\u003cli\u003eCamshafts: GSC Power-Division billet S3 camshafts; Kelford DLC Coated valve lifter buckets, valve lash set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IAG","offers":[{"title":"Default Title","offer_id":67823095283808,"sku":"IAG-ENG-L113N3","price":19249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/IAG-1150-2_35L-Destroked-Long-Block-2018-2019-STI-Type-RA-2019-STI-GSC-S3-Camshaft-Upgrade-IAG-ENG-L113N3.jpg?v=1795006414","url":"https:\/\/www.importimageracing.com\/products\/iag-1150-2-35l-destroked-long-block-2018-2019-sti-type-ra-2019-sti-gsc-s3-camshaft-upgrade-iag-eng-l113n3","provider":"Import Image Racing","version":"1.0","type":"link"}