{"product_id":"iag-950-2-35l-destroked-long-block-2006-14-wrx-2006-13-forester-xt-2007-09-legacy-gt-iag-eng-l953d","title":"IAG 950 2.35L Destroked Long Block w\/ IAG 950 Heads Subaru WRX 2006-2014 \/ Forester XT 2006-2013 \/ Legacy GT 2007-2009 | IAG-ENG-L953D","description":"\u003ch2\u003eProduct Fitment\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003e2006-2014 Subaru WRX\u003c\/li\u003e\n  \u003cli\u003e2006-2013 Subaru Forester XT\u003c\/li\u003e\n  \u003cli\u003e2007-2009 Subaru Legacy GT\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe IAG 950 2.35L Destroked Long Block Engine w\/ IAG 950 Heads is a complete valve-cover-to-valve-cover crate engine, ready to drop in. It is built from 100% brand-new components, with no core charge, and is rated up to 950 BHP. Every engine is hand-assembled by IAG Performance.\u003c\/p\u003e\u003ch2\u003eWhy Destroke?\u003c\/h2\u003e\u003cp\u003eDestroking pairs a shorter stroke with longer rods. The shorter stroke reduces piston speeds, the longer rods optimize the rod-to-stroke ratio, and the combination increases piston dwell at top dead center. The result is a 2.35L engine that revs to a maximum of 8,500 RPM while retaining the strength of the IAG 950 closed deck platform.\u003c\/p\u003e\u003ch2\u003eThe IAG 950 2.35L Destroked Short Block\u003c\/h2\u003e\u003cp\u003eThe short block starts with new Subaru 2.5L case halves, machined on a Haas VF-4SS CNC machining center and fitted with IAG closed deck inserts. Each block is bored and honed to 99.75mm on a Sunnen SV-30 honing machine with a custom piston-to-wall clearance. The Fire-Lock groove is machined around each bore, and the case halves are drilled for 14mm head studs. The rotating assembly uses a new 2.0L FHI crankshaft, custom IAG Spec +2mm H-beam forged connecting rods with ARP 625+ rod bolts, and ACL or King rod and main bearings. The assembly is balanced and blueprinted, and the block is finished with new OEM main and case bolts and sealant.\u003c\/p\u003e\u003ch2\u003eFire-Lock\u003c\/h2\u003e\u003cp\u003eFire-Lock machines a groove around each cylinder bore and installs a stainless steel wire ring that bites into the head gasket, locking the gasket in place under high cylinder pressure. The system is designed for 14mm head studs, a substantial increase over the factory 11mm studs, and provides the head gasket sealing needed for high-boost applications.\u003c\/p\u003e\u003ch2\u003eClosed Deck Strength\u003c\/h2\u003e\u003cp\u003eIAG closed deck inserts reinforce the cylinder bores, preventing bore distortion and cracking under high boost and high cylinder pressure. The closed deck design is a key part of what allows the IAG 950 platform to support up to 950 BHP.\u003c\/p\u003e\u003ch2\u003eIAG-Spec JE Pistons\u003c\/h2\u003e\u003cp\u003eThe pistons are IAG-Spec JE 99.75mm FSR 2618 forged pistons with electroless nickel plating, extra-thick ring lands, .240\" wall H13 tool-steel wrist pins, and JE Perfect Skirt coating. The 2618 alloy and the nickel plating provide the strength and durability required for high-horsepower, high-RPM use.\u003c\/p\u003e\u003ch2\u003eThe IAG 950 Cylinder Heads\u003c\/h2\u003e\u003cp\u003eThe IAG 950 ported head package starts with new OEM cylinder head castings from Subaru of America. The intake and exhaust ports are CNC-ported on a Centroid 5-axis CNC machine, including the exhaust dog-leg, and the heads receive cam clearance machining and are drilled for 1\/2\" (14mm) head studs. The valvetrain uses +1mm GSC Superalloy intake and exhaust valves, Viton valve seals, and GSC Manganese-Bronze valve guides that are diamond-honed. IAG-Spec Beehive valve springs with titanium retainers and OEM keepers control the valves, and a multi-angle valve job is performed on a Newen 3.0 valve guide and seat machine. The heads are resurfaced on a TS-3000 BlockMate, ultrasonically cleaned, and hand reassembled.\u003c\/p\u003e\u003ch2\u003eWhat Makes CNC-Ported Heads Better?\u003c\/h2\u003e\u003cp\u003eCNC porting produces identical, repeatable port shapes on every head, with smooth, consistent airflow that hand porting cannot match. The ported heads flow more air at every valve lift, which supports higher power throughout the rev range and makes the most of the GSC S2 camshaft package.\u003c\/p\u003e\u003ch2\u003eGSC S2 Camshaft and Lifter Bucket Package\u003c\/h2\u003e\u003cp\u003eThe long block includes GSC S2 camshafts matched with Kelford DLC (diamond-like carbon) lifter buckets. The S2 camshafts are designed for 500 WHP and up, providing the valve lift and duration needed for high-horsepower builds while remaining streetable.\u003c\/p\u003e\u003ch2\u003eQuality Guaranteed\u003c\/h2\u003e\u003cp\u003eIAG stands behind this engine with a 12-month \/ 12,000-mile warranty as standard. The warranty can be extended up to 24 months \/ 24,000 miles when the engine is purchased, installed, and tuned by an IAG Certified Installation Facility.\u003c\/p\u003e\u003ch2\u003eLong Block Installation Kit\u003c\/h2\u003e\u003cp\u003eYour mechanic will transfer the intake and exhaust manifolds, turbo, fuel pump, and injectors to the new engine during installation.\u003c\/p\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003eComplete valve-cover-to-valve-cover crate engine, ready to drop in\u003c\/li\u003e\n  \u003cli\u003e100% brand-new components, never a core charge\u003c\/li\u003e\n  \u003cli\u003eRated up to 950 BHP\u003c\/li\u003e\n  \u003cli\u003e2.35L destroked displacement with a maximum RPM of 8,500\u003c\/li\u003e\n  \u003cli\u003eNew Subaru 2.5L case halves with IAG closed deck inserts\u003c\/li\u003e\n  \u003cli\u003eFire-Lock head gasket sealing system with 14mm head studs\u003c\/li\u003e\n  \u003cli\u003eNew 2.0L FHI crankshaft\u003c\/li\u003e\n  \u003cli\u003eCustom IAG Spec +2mm H-beam forged rods with ARP 625+ rod bolts\u003c\/li\u003e\n  \u003cli\u003eIAG-Spec JE 99.75mm FSR 2618 pistons with electroless nickel plating\u003c\/li\u003e\n  \u003cli\u003eIAG 950 CNC-ported heads with +1mm GSC Superalloy valves\u003c\/li\u003e\n  \u003cli\u003eGSC S2 camshafts with Kelford DLC lifter buckets, designed for 500 WHP and up\u003c\/li\u003e\n  \u003cli\u003eHand-assembled by IAG Performance\u003c\/li\u003e\n  \u003cli\u003e12-month \/ 12,000-mile warranty, up to 24 months \/ 24,000 miles through an IAG Certified Installation Facility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eProfessional installation is required. Please review the IAG after-sale document, which contains shipping, engine care, and warranty information: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0828\/8623\/0234\/files\/Engine-After-Sale-Shipping-Doc.pdf\"\u003ePDF After Sale Document - Contains Shipping, Engine Care and Warranty Information\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eIAG also provides an installation video: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=ogInIZNmKo8\"\u003eIAG Long Block Installation Video\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n  \u003cli\u003ePower Rating: Up to 950 BHP\u003c\/li\u003e\n  \u003cli\u003eDisplacement: 2.35L destroked\u003c\/li\u003e\n  \u003cli\u003eMaximum RPM: 8,500\u003c\/li\u003e\n  \u003cli\u003eBore: 99.75mm\u003c\/li\u003e\n  \u003cli\u003eCase Halves: New Subaru 2.5L, Haas VF-4SS CNC machined, closed deck inserts\u003c\/li\u003e\n  \u003cli\u003eCrankshaft: New 2.0L FHI crankshaft\u003c\/li\u003e\n  \u003cli\u003eConnecting Rods: Custom IAG Spec +2mm H-beam forged rods with ARP 625+ rod bolts\u003c\/li\u003e\n  \u003cli\u003ePistons: IAG-Spec JE 99.75mm FSR 2618, electroless nickel-plated, extra-thick ring lands, .240\" wall H13 tool-steel wrist pins, JE Perfect Skirt coating\u003c\/li\u003e\n  \u003cli\u003eBearings: ACL or King rod and main bearings\u003c\/li\u003e\n  \u003cli\u003eHead Studs: 14mm, Fire-Lock groove with stainless steel wire ring\u003c\/li\u003e\n  \u003cli\u003eCylinder Heads: IAG 950 CNC-ported heads, new OEM castings, Centroid 5-axis CNC porting\u003c\/li\u003e\n  \u003cli\u003eValves: +1mm GSC Superalloy valves with Viton seals\u003c\/li\u003e\n  \u003cli\u003eValve Guides: GSC Manganese-Bronze, diamond-honed\u003c\/li\u003e\n  \u003cli\u003eValve Springs: IAG-Spec Beehive springs with titanium retainers and OEM keepers\u003c\/li\u003e\n  \u003cli\u003eCamshafts: GSC S2 with Kelford DLC lifter buckets, designed for 500 WHP and up\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12 months \/ 12,000 miles standard; up to 24 months \/ 24,000 miles when purchased, installed, and tuned by an IAG Certified Installation Facility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IAG","offers":[{"title":"Default Title","offer_id":67817986981984,"sku":"IAG-ENG-L953D","price":14599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1398\/9853\/files\/IAG-950-2_35L-Destroked-Long-Block-2006-14-WRX-2006-13-Forester-XT-2007-09-Legacy-GT-IAG-ENG-L953D.jpg?v=1795005683","url":"https:\/\/www.importimageracing.com\/products\/iag-950-2-35l-destroked-long-block-2006-14-wrx-2006-13-forester-xt-2007-09-legacy-gt-iag-eng-l953d","provider":"Import Image Racing","version":"1.0","type":"link"}