Whiteline Rear Upper Control Arms Camber Bushings Nissan 240sx 1989-1998 | KCA347

Rear excess negative camber is a problem for RWD Nissans when lowered beyond 1.75 inches. The stock eccentric camber bolt has limited rear arm adjustment. When you start to really slam your 240SX, you require more rear negative camber adjustment. Too much negative camber will drastically wear out the inside contact patch of your expensive rubber, and also not allow for maximum braking and acceleration due to the offset tire patch. The rear end may handle great, but youll burn up your insides of your tires in a very short time.

Whiteline's bushing kit for the 240SX rear upper control arms are a cheap and effective way of increasing camber by +/- .75 degrees.

FITMENT: Nissan 240SX 1989-1998

Part Number: KCA347

California Prop 65 Warning: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.p65warnings.ca.gov.