P3 Gauges Analog Multi Gauge Subaru WRX / STI 2015-2021 | AP3S8SX

Fitment Information:

2015-2021 Subaru WRX

2015-2021 Subaru STI

*Left-hand drive models only.

Please note: Installation requires you to modify your factory vent to complete the install. This gauge is not plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

Features:

The P3 Analog Vent Gauge offers two analog inputs so that you can bring even more information to your display without the need of your OBD2 port. This gauge has been designed to install in your air vent for a seamless blend into your car's interior, while still offering a bold, bright display that allows you to pick up information at a glance. This design further retains the function of your vent for continued heat and A/C flow.

• Analog Boost / Vaccuum
• Analog Battery Voltage
• Optional auto-dim or manual dimmer
• (2) universal 0-5V linear analog inputs

Four Available Analog Readouts:

• Analog boost (yellow/purple/black - dedicated plug for analog boost sensor) *boost tap not included
• Analog input 1 (brown wire - can read any 0-5 volt linear output sensor)
• Analog input 2 (blue wire - can read any 0-5 volt linear output sensor)
• Battery voltage (red wire / black wire - read through power and ground wires)
• Optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

What's in the Box:

• Display
• Analog Box control unit
• Main harness
• Hard-wire harness
• Analog boost sensor *boost tap not included
• Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
• 3 zip ties
• 2 scotchlok wire taps