The PERRIN Subaru STI High-Flow Fuel rails are designed to deliver large amounts of fuel equally to each cylinder. Consumers running big horsepower that require large injectors will notice the car runs smoother and is more powerful and tuners can safely push the engine closer to the edge.
PERRIN High-Flow Fuel Rails incorporate large inside diameter channels for maximum fuel flow. This allows for cars to run 800 WHP without inconsistent fuel flow to each cylinder. We include custom made -6 barbed fittings with O-rings to ensure a proper connection to the hose. These fittings are removable allowing for easy customization of aftermarket fuel lines.
The equal flowing nature of PERRIN fuel rails allow your high powered Subaru to make more power, safer. A must have for any car looking to exceed 400 horsepower.
PERRIN High-Flow Fuel Rails split incoming fuel for equal fuel distribution, pressure, and more consistent air fuel ratio between all cylinders. The stock fuel rails route the fuel through the engine bay sequentially providing each injector with fuel. In modified Subarus, this drastically reduces fuel delivery to the last injector in line.
The PERRIN fuel rails and distribution block are precision CNC machined from 6061 billet aluminum. Each -6 Barbed Fitting is removable from the rails and distribution block allowing for easy customization of aftermarket fuel lines.
All PERRIN High-Flow Fuel Rails come with built-in phenolic spacers. The spacers fitted to fuel rails and junction blocks sit between these and the engine, insulating it from heat. This keeps fuel closer to its normal ambient temperature. In contrast, without these spacers, you can see fuel temperatures rise far more than 30 degrees above ambient.
PERRIN fuel rails feature large 3/8” inside diameter fuel injection hose which provides higher flow rate than competitive systems. This hose is large enough to support 800+ WHP. Included hose is a DOT approved, rubber fuel injection hose with proper liners for zero emissions. A byproduct of the hose being constructed of rubber is that it helps dampen the fuel against pressure waves and, in turn, creates a smoother and more constant fuel pressure
WARNING: Cancer and Reproductive Harm
Happy with the quality of the rails and everything else that comes in the kit. Plenty of hose and splices to run them however you want. However, i do recommend not using the clamps that come with the kit. Even after the insulation and taping the hose ends, the clamps were still too big to tighten up properly, which required all of them to be cut off and replaced. I will buy this kit again if we build another Subaru.