Cobb Shift Plate Subaru WRX 2015-2026 | 244320

This provides significant improvement in the feel when shifting. I used the 35% reduction! The shifter plate looks great and has a nice weight tk it as well.

Install was not technically challenging, but it was time consuming for me. At least 1.5 hours button to button. Admittedly, a lot of the time was removing and reinstalling bolts located in tight spots. They just take a bit of time.

Not the easiest thing to install without a lift. But it made a night and day difference with the slop in the shifter. Definitely worth every penny.

With so many shift plates and kits to go with on the market it's tough to tell which company to settle with. I went with the kartboy kit first and the shifting was short but too crunchy. Later on I found that when I installed the cobb the quality and material were night and day difference! The cobb is much more weighted and gives you 2 different throw percentage options to choose from. I went with the 35% throw paired with a billetworkz weighted shift knob and it is near perfect. Cobb really doesn't cut any corners when it comes to quality. Am a cobb customer for life now!

This shift plate combined with a shift stop and upgraded bushing is how the VB transmission should have come from the factory! Biggest plus to this plate over the others, is the ability to retain the factory covers. Took me longer than I care to admit to install because who needs directions....follow the directions and it will be very quick. Even for someone like me who was just laying on the garage floor on a mat with the car on ramps.

This was not really that hard to install just make sure you have the right tools. The shift throw is so much shorter and crisper now. This with the brass shifter bushing is the way to go. COBB made the perfect shift plate here the factory shield still fits without trimming if you want to keep it. Excellent purchase great mod would highly recommend this.

Shift plate may be a tight fit but nonetheless, an easy install and changes the way I shift. Shorter and crispier shifts all around

Great product combined with a shift stop and shift bushing, transforms your shift experience

No major issues on the install with 40k miles on northern climate. Patience was required to get the push pin out and a small pry bar was needed to get the OEM shift plate to slide out of the transmission shifter shaft. Again, patience was required. Cobb plate was easy to install. Be sure to apply plenty of Lock-tite. Use red for more piece of mind and get a good wrench to tighten the shift plate pin into the shifter plate. Allow 24 hours for lock-tite to fully set. Will check again after 1000 miles to make sure nothing has losen up. I do absolutely love the new shorter throws. I paired with a Billetworkz short throw shifter and brass bushing. What a major difference. Set it up with the inner location for a total shortest throw distance of about 1" each way. To me it feels perfect but you can choose the outter location to be less aggressive. I tested both locations before locking the inner pin location. Love that the Cobb retains the dust shield.

Shortened shifts exactly how I wanted!

Definitely a hefty piece and does what it’s supposed to. Cobb is always the go to!