GSC S3 Cams 282/282 Billet Camshafts 2008-2018 STi (7026S3)

23 In stock
Engine Camshafts and Gears

🚀 If you were a VIP member, you'd be getting $49.94 in BuildBUX for buying this part 🤷 Join us!

$1,175.00 $998.75
0% Financing for 12 months with Affirm!

Delivery Estimate: Order within hours minutes and use Fastrak at Checkout



For your 2008-2018 Subaru STI

GSC Power-Division billet S3 camshafts for the 08+ Subaru STi EJ257 with Dual AVCS. These camshafts are built to suit high horsepower cars with a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs.  Specific engine modifications are required to utilize the true potential of these camshafts including a built bottom-end (sleeved or closed deck reccomended), built/ported heads (casting must be clearanced for higher lift), and upgraded valve springs.  A standalone ECU or tune with speed density is highly reccomended in order for proper idle characteristics.

  • Check Pictures for cam placement. Long nose = Left Side, short nose = Right Side
  • Due to the lobe size head castings will need to be machined down for clearance - Please check during install
  • Proper break in and running high zinc oil is a must on flat tappet engines
  • Must be installed by an experienced technician
  • Check AVCS advance during install - must be done by experienced engine builder
7026S3 ADV Duration Duration @ 0.040" Peak Lift Center Line
Intake 280° 240° 11.55mm 130°
Exhaust 280° 241° 11.60mm 128°
GSC S3 Cams 282/282 Billet Camshafts 2008-2018 STi (7026S3)
You have successfully subscribed!
This email has been registered