Part #: IS-NIS-1338
ISR Performance Brake Line Kit - Nissan 370Z 09-10 (Akebono Brakes)
Whats in the Box:
- 2x Front Brake line assembly
- 2x Rear Brakes lines
* Brake line installation should be done by a professional mechanic. Read and follow installation instructions completely
Raise vehicle. Remove Wheels and drain all brake fluid. Carefully remove existing brake lines from vehicle, avoid splashing paint work with brake fluid. Make note of positions of C-clip(s), and banjo(s), if used. Remove all crush washers from there mating surfaces.
Clean all sealing surfaces and make sure they are in good condition.
Fit these lines starting at the caliper and following the original path of the OEM lines. Ensure all location tabs and mounting brackets are properly attached to their mating points on the frame or chassis and are not causing tension on either end of the connection. Do not fully tighten the bolts or threaded ends until the last step of the installation.
Check that the lines are the correct lengths. The hoses should not be kinked or twisted. The opposite axis torque lines should remain parallel along the entire length of the hose. Full travel of the suspension and steering must be checked to ensure the hoses are not stretched or trapped.
Tighten banjo bolts and end fittings. If you're tightening these hoses to a factory hard line, the hard line must be held in place using the correct size wrench. Bolts and end fittings should be tightened to the manufacture’s recommended torque specs. If not then tighten to 12 to 14 (ft/lbs).
You are now ready to bleed the brakes. You must use fresh DOT approved brake fluid and bled the system in accordance to the vehicles manufacture’s recommendations.
Before test driving your vehicle, make a final Check of the lines to ensure all connections are tight and do not leak. The brake pedal should be firm at this stage. After the first 100 miles recheck all the lines and connections for tightness and any leaks.
- It is not recommended to mix rubber hoses and stainless steel replacement lines on the same brake system.
- Do not try to force, rotate or stretch any stainless steel hose assembly; it may cause failure.
** All ISR Performance Products are Designed for Off Road Use Only **
Any returns for an exchange or refund will be allowed within 30 days from the receipt of your order and must be authorized prior to shipping with an RMA Number (Return Merchandise Authorization). To receive your return instructions and RMA# please use our online form under Returns and Exchanges! Once you receive your return instructions please ship out the item at your earliest convenience and provide the tracking number to your customer service rep. The customer will be responsible for all shipping fees. Before shipping your product back please make sure you package it up exactly how you received it and in all of its original packaging. All items must be in brand new and resalable condition. Once the item is received it will be inspected and a credit will be issued accordingly. All returns are subject to a 15% restocking fee. Any returns received without an RMA# will be charged a restocking fee and any shipping fees associated with the return. An item that does not ship directly from IIR's warehouse is considered a "special order" item and no returns will be authorized.