Mishimoto Silicone Intercooler Hose Kit Subaru STI 2004-2007

Appreciate the large/wide tee-clamps that came with the hoses, though the clamps for the vent side of the BOV to intake might be overkill, and the large clamps at the throttle inlet were very difficult to install as there's very little room to loosen while still keeping the nut on the threads. I had to trim the long side of the turbo-to-intercooler elbow by about 1/2" as it was too long for a stock setup.

looks amazing and well built. had to replace the craked rubber lines on my 20 year old WRX and these are better than OEM

I only needed the tube for the bypass valve to the inlet tube. I couldn't find one anywhere else. It had to be cut slightly on the side to the inlet tube. I have a 2017 STI. The stock tube is soft and stretches. It would be nice to have a specific tube for my application

Turbo to intercooler Y pipes hose has to be cut quite a bit, not the biggest issue but still shouldn't have to cut. hose is good quality fitment is a 6/10