This is the second version of our rear brake lamp / F1 / reverse light for the 2022+ Subaru BRZ and Toyota GR86.
Compatible with base, premium, limited, and special edition vehicles, these rear fog lamps bolt right into your vehicle. It's a straight swap plus some easy wiring.
Lens Options: Clear or Smoked
Plug and Play Reverse, Pigtail brake
F1 or Solid Brake Lamp
Aftermarket styling
NOTE:Wired for USDM vehicles. Overseas customers may have to tap into the stock vehicle functions.
Warranty
1 year against manufacturer defects
Installation Notes
If you don't want to crimp over your factory wires, we suggestion you purchase our PnP harness. This breaks out the stock connection into some wires which allow you to easily connect aftermarket lamps. Our PnP harness is labeled for your convenience.
Start with removing the factory trim piece which goes over the stock lamp. Then remove the factory lamp and unplug it. You will need to plug it into the new lamp and bolt it in.
The factory reverse function of this lamp is plug and play. The additional brake function needs additional wires to be run into the tail light area. You are supplied with crimp on connectors to clamp down to your factory tail light wiring.
Run these wires to behind a tail light. The blue wire connects to the factory brake wire (brown) if you want it to blink. Connect the red wire instead if you want it to be a solid brake lamp. If you are using our PnP add on harness, reference the labels that come on the harness. You are using the ones noted as (86).
Test the wiring and then reassemble everything. Reuse the factory trim piece.
I love my new light. The reverse lights are bright LED's and can be seen from a lot farther. Not to mention, they light up the dark area a lot better than the OEM reverse lights.
I love how the center (4th brake light) is now operational. I hooked it up to where it blinks first, then goes steady. I like that feature. I had seen some other versions and this one was the one I liked the best.
My only issue was the installation video. There were two areas that didn't really explain about the clip and where the clip would be. Also, the light wires are short, so it is a big hassle to plug them in to the wire harness coming down.
Beautiful product BUT it is no compatible with europeans GR86/BRZ , and it is not plug and play,?because the noble plug is with 2 pins wheras european plug is with 3 pins
So even with the harness kit impossible to connect the flash brake ( even with a splice)
