These make your stock OEM tail lights look a closer to aftermarket ones. They add a lot of style for how simple they are. Once you squeegee out the water / air, these can stay on your car almost forever. No worries with auto car washes or power washing. Choose LIGHT or DARK smoke.
Installation instructions:
Difficulty 3.5 of 5
Recommended Tool(s): Heat Gun or Hair Dryer, soapy water
Clean the surface of the tail light. Use soapy water to make installation easier. Place the slightly soapy water on the tail light and the adhesive side of the overlay. Start in the middle of the tail light and apply the film. Use your fingers to squeegee out the water. I recommend you use your fingers so you do not scratch the material. The heat can be used to allow the material to stretch AND to slightly shrink it when you're not pulling it. Massage out creased with your fingers. You may have to pull up sections and reapply if many creased begin to appear. Keep working the material until you have 100% coverage. Average time per install is 10 minutes per side. Best to allow the vehicle to remain in the sun for some time and DO NOT POWER WASH for at least 48 hours. Some bubbles and creases may disappear over time and exposure to heat.
