Subaru OEM Secondary Air Pump Assembly Forester XT / WRX 2006 | 14828AA030

Overview

The Genuine Subaru OEM Secondary Air Pump Assembly (Part #14828AA030) is the factory-original emissions component designed specifically for the 2006 Subaru Forester XT and 2006 Subaru WRX. This air injection pump introduces fresh air into the exhaust stream during cold starts to reduce harmful hydrocarbon and CO emissions, ensuring your vehicle meets OEM emissions standards and passes inspection. Replacing a failed secondary air pump with the genuine Subaru part guarantees an exact fit and restores factory emissions system function.

Key Features & Benefits

• Genuine Subaru OEM Quality — Manufactured to factory specifications for the 2006 Forester XT and 2006 WRX; no modifications or adapters required for installation.
• Exact-Fit Replacement — Direct bolt-on replacement for the original secondary air injection pump; eliminates fitment guesswork common with aftermarket alternatives.
• Emissions Compliance — Restores the secondary air injection system to OEM function, helping your vehicle pass emissions testing and maintain compliance with applicable standards.
• Factory Warranty Coverage — Backed by Subaru's genuine parts warranty for peace of mind.
• Durable Construction — Built to the same tolerances as the original pump that came on your vehicle from the factory.
• Clear Check Engine Light — Properly resolves P0410 and related secondary air injection fault codes caused by a failed pump.

What's Included

• 1x Genuine Subaru Secondary Air Pump Assembly (Part #14828AA030)

Specifications

Fitment & Compatibility

This genuine Subaru secondary air pump assembly is confirmed to fit the following vehicles:

2006 Subaru Forester XT

2006 Subaru WRX

Note: Always verify your vehicle's Subaru part number against 14828AA030 before ordering to confirm fitment. If you are unsure, reference your current pump's part number stamped on the housing.

Installation

The Subaru OEM Secondary Air Pump Assembly is a direct bolt-on replacement. Installation involves disconnecting the electrical connector and air hoses from the original pump, unbolting the pump from its bracket, and reversing the process with the new unit. While a mechanically experienced owner can perform this replacement, professional installation by a qualified Subaru technician is recommended to ensure proper torque specifications and leak-free connections. After installation, clear any stored fault codes with a scan tool and verify the secondary air injection system operates correctly during a cold-start cycle.