More 2013-2020 Subaru BRZ parts:
All 2013-2020 Subaru BRZ parts | Brakes | Drivetrain | Engine | Exhaust | Exterior | Intake | Interior | Lighting | Suspension | Cooling | Wheels | Fuel | Fluids | Wheel Accessories | WheelSpacers
Shop tuning and engine management parts for the Subaru BRZ 2013–2020 (ZC6 chassis). The FA20 has a documented mid-range torque dip, described as a torque decrease between roughly 3,000 and 5,000 rpm. Header plus tune is the sourced owner path for addressing that dip on ZC6 cars. You will find engine management, ECU tuning and programmers here — every part in this collection is fitment-tagged for the Subaru BRZ 2013–2020, so check your trim, year and engine against the product fitment notes before ordering.
What tuning and engine management parts fit my Subaru BRZ 2013–2020 (ZC6 chassis)?
Every part in this collection is fitment-tagged for the Subaru BRZ 2013–2020 (ZC6 chassis). Fitment splits by year and transmission on this car: original cars make 200 hp / 151 lb-ft, 2017+ manual cars make 205 hp / 156 lb-ft with a 4.30 final drive while automatics retain 200 hp / 151 lb-ft, and Performance Package and tS cars carry different brakes and dampers from standard Premium and Limited cars. Confirm fitment on the product page for your exact year, trim and transmission before ordering.
What is the usual path for addressing the FA20 torque dip?
Header + tune is the sourced owner path for addressing the FA20 torque dip between roughly 3,000–5,000 rpm. When ordering tuning parts, be ready to say whether the car is already tuned and what fuel and header setup it runs.
Where can I find other parts for my 2013-2020 Subaru BRZ?
Start with the full 2013-2020 Subaru BRZ collection linked at the top of this page, or jump straight to a category — Brakes, Drivetrain, Engine, Exhaust, Exterior, Intake and more are all linked above, and every one of them is scoped to the 2013-2020 Subaru BRZ only.