Great news – on this purchase, you'll enjoy a BuildBUX bonus of $3.50.
Fitment Information:
2022-2026 Subaru WRX
Do you have an upgraded J-pipe requiring you to remove your splash shield/skid plate?
Are you worried about smashing your oil pan or turbo because you are so low?
Maybe you plan to use your WRX for what Subaru designed it for!! RALLY!! or maybe you are just simply tired of removing the factory shield to drain your oil.
Whatever your need is we have covered all of the bases! Made from Aerospace grade aluminum, cut, formed, assembled and powder coated right here in Fort Myers Florida!!
Features:
Installation Features
Installation can be completed in as little as 10 minutes with simple hand tools.
Tools required:
10mm socket
12mm socket
13mm socket
short and long extensions
ratchet
4mm allen key
Mounts utilizing factory mounting points/threaded holes, no riv-nuts to mess up. No special tools to buy.
Front mounting "hooks" help aid with holding the plate up during installation/removal
Simply install the 2 longer 8mm bolts into the forward mounting holes threading them in only 4-5 turns, we will hang the skid plate from the bolts during the installation process. 
Then find the 2 grounding straps running from the engine to the chassis (one on each side of the motor. This is where the support brackets (labeled DR and PS respectively) will be hung. Be sure to leave all hardware very loose during installation to allow for final adjustments. Take care to make sure to reinstall the grounding straps are routed through the holes in the brackets and installed onto the oem bolts. 
Take the skid plate now and locate the 2 forward slotted mounting points. These will hang on the 2 previously installed bolts in the front core support. Once in place take the other 2 shorter 8mm mounting bolts and thread them into the subframe through the rear mounting holes of the skid plate. DO NOT TIGHTEN YET
Once the skid plate is hung into place we will take the 4 hex drive flat head bolts and secure the skid plate to the chassis support brackets, go ahead and TIGHTEN these bolts.
Once the support bracket bolts are tightened to the skid plate we can go ahead and evenly tighten the 4 main 8mm mounting bolts at the front and back of the skid plate.
Finally once the skid plate is in place carefully tighten the 2 bolts in the chassis at the top of the support brackets, being sure the ground straps are installed properly and make sure they do not spin stretching the cables.
More Cashback
Get more cashback! Items are changing weekly. Anywhere from 1% to 20% Back in BuildBUX when you make purchases. Products
Free Money
Every month when you are charged your $4.98 subscription fee, you will get $15 in BuildBUX
Easy To Cancel
Cancel anytime, month to month terms.
Cashback
Get 1% back on every purchase on eligible brands.
Free
Completely free to use. Just place an order!
