Verus Full Brake Cooling Kit Subaru BRZ / Scion FR-S / Toyota GT86 2013-2020 | A0037A

Fitment Information:

2013-2020 Subaru BRZ

2013-2016 Scion FR-S

2017-2020 Toyota GT86

Features:

The Verus Engineering Full Brake Cooling Kit has been designed for those looking to maximize their brakes' cooling efficiency and increase their ability to do their job. This well-thought and executed brake cooling kit is configured in an OEM style format with an emphasis on the shortest possible route to dramatically reduce rotor temperatures during high-performance driving, while improving pad and rotor wear. Using the OEM fog lights as the inlet to the kit and a well-formed duct in the inner fender line, this is the brake cooling kit to have. It comes with everything necessary for install including pre-cut hoses.

During the design process, at Verus they utilized in-house scan data and 3D printing which resulted in a product that features a precise fit and high-quality finish.

• Backing plate is made out of stainless steel
• Dry carbon air duct
• Hard plastic fender ducts (pancake duct)
• Hard plastic fog light ducts
• Pre-cut to size 3" and 2.5" brake duct hoses (Neoprene for fog light and High- temp Silicone for backing plate)
• All necessary hardware is included
• Dry carbon ducts direct air into the center of the rotor for maximum cooling
• Stainless backing plate with carbon duct increase airflow where it benefits brake cooling the most
• Short routing to maximize cooling efficiency and airflow
• Installs in a few hours with minimal hand tools
• Made in the U.S.A.

What's Included:

• (1) Left Backing Plate with Carbon Ducts Riveted On
• (1) Right Backing Plate with Carbon Ducts Riveted On
• (2) 2.5" Pre-Cut Silicone High Temp Brake Hose
  
• (2) Fender Pancake Duct
  
• (2) Fender Pancake Duct Bracket
  
• (2) 3.0" Pre-Cut Neoprene Brake Hose
  
• (4) 3.0" Stainless Hose Clamp
  
• (4) 2.5" Stainless Hose Clamp
  
• (2) Foglight Duct
  
• (2) 2013-2016 MY Foglight Duct Bracket
  
• (2) 2017+ MY Foglight Duct Bracket
  
• Steering Rack Limiter Kit
  
• Installation Hardware Kit
  

Please note:

• OEM or similar fog light bezels are necessary for a seamless install.
• The removal of the washer fluid reservoir is required, however there are multiple ways to retain the reservoir.
• The backing plate may require trimming to fit with other aftermarket braking and suspension components.
• Depending on the wheels/tires/suspension setup, steering rack limiters may need to be installed and are included with this kit.